bsncubed
6d85eb49f8
With the default 10, PTP (2), AES67 TX, SAP, syslog and httpd's listen/control sockets left ~3 for web clients although httpd allows 7. A browser's keep-alive connections then made new requests fail with a reset for seconds at a time (the intermittent 'outages'). Reproduced: with 1 idle connection held, new requests were reset. After: 6 idle connections held, new requests answered in 6-7 ms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
27 lines
1.2 KiB
Plaintext
27 lines
1.2 KiB
Plaintext
CONFIG_IDF_TARGET="esp32p4"
|
|
|
|
# OTA layout (partitions.csv): two app slots, no factory
|
|
CONFIG_PARTITION_TABLE_CUSTOM=y
|
|
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
|
|
# Bootloader had only 6% free below 0x8000; moved so it can grow (e.g. secure boot) without a relayout
|
|
CONFIG_PARTITION_TABLE_OFFSET=0x10000
|
|
|
|
# Rollback lives in the bootloader, which is only ever flashed over USB: enable it from the start
|
|
CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
|
|
|
|
# Board has engineering silicon v1.3 (esptool chip_id). Rev <3 binaries don't run on rev 3 and vice versa.
|
|
CONFIG_ESP32P4_SELECTS_REV_LESS_V3=y
|
|
CONFIG_ESP32P4_REV_MIN_100=y
|
|
|
|
# 32 MB flash (esptool flash_id: GigaDevice c8/4019). App slots stay below 16 MB;
|
|
# cache mapping above 16 MB is experimental in IDF.
|
|
CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y
|
|
|
|
# LLDP and PTP send raw frames from their own tasks next to lwIP: serialise EMAC transmits
|
|
CONFIG_ETH_TRANSMIT_MUTEX=y
|
|
|
|
# lwIP default is 10 sockets; PTP (2), AES67 TX, SAP, syslog and httpd's listen/control sockets
|
|
# use 7, leaving ~3 for web clients (httpd allows 7): a browser's keep-alive connections then
|
|
# starve new requests. 16 = 7 others + 7 web clients + OTA self-test client + 1 spare.
|
|
CONFIG_LWIP_MAX_SOCKETS=16
|