bsncubed bbfd3506bf Step 0: IDF project skeleton for esp32p4 with core component stubs
- Board checked with esptool: ESP32-P4 rev v1.3 (engineering silicon),
  32 MB GigaDevice flash. Rev <3 support and 32 MB set in sdkconfig.defaults.
- OTA partition layout: nvs, otadata, phy_init, ota_0/ota_1 (6 MB each,
  below 16 MB), coredump; no factory app. Partition table at 0x10000 so
  the bootloader can grow.
- App rollback enabled in the bootloader from the start.
- PROJECT_VER from git describe --tags --always --dirty.
- Empty stubs for the nine aes67_* core components; main logs version
  and chip revision.
- Built with ESP-IDF v5.5.5; not yet flashed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 22:47:21 +10:00
2026-09-23 21:52:46 +10:00
2026-09-23 21:51:44 +10:00

aes67-ESP32-P4

AES67 sender for the Waveshare ESP32-P4-ETH (PoE): Spotify Connect and HLS/m3u8 streams out as an AES67 multicast stream, PTP-locked, with a simple web UI for settings and SDP export.

  • docs/aes67-core-base.md — reusable AES67 core design (PTP, RTP, SDP/SAP, VLAN, syslog, web UI contract)
  • docs/hardware-and-design-notes.md — board details and project-specific design
  • web/index.html — web UI (served by the device)
  • CLAUDE.md — working rules and build order

Status: design complete, firmware not started. See the build order in CLAUDE.md.

S
Description
No description provided
Readme GPL-3.0 1.1 MiB
Languages
C 74.9%
HTML 11.9%
C++ 7.7%
Python 3.3%
CMake 2.2%