bsncubed
bbfd3506bf
- Board checked with esptool: ESP32-P4 rev v1.3 (engineering silicon), 32 MB GigaDevice flash. Rev <3 support and 32 MB set in sdkconfig.defaults. - OTA partition layout: nvs, otadata, phy_init, ota_0/ota_1 (6 MB each, below 16 MB), coredump; no factory app. Partition table at 0x10000 so the bootloader can grow. - App rollback enabled in the bootloader from the start. - PROJECT_VER from git describe --tags --always --dirty. - Empty stubs for the nine aes67_* core components; main logs version and chip revision. - Built with ESP-IDF v5.5.5; not yet flashed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
12 lines
662 B
CSV
12 lines
662 B
CSV
# OTA layout: two app slots, no factory app. Fixed from step 0 on; do not change later.
|
|
# 32 MB flash, but app slots must stay below 16 MB (no cache mapping above it). 16-32 MB is free for data.
|
|
# Partition table at 0x10000 (not 0x8000) leaves the bootloader room to grow (0x2000-0x10000).
|
|
# NVS sits outside the app slots so config survives updates.
|
|
# Name, Type, SubType, Offset, Size
|
|
nvs, data, nvs, 0x11000, 0x6000
|
|
otadata, data, ota, 0x17000, 0x2000
|
|
phy_init, data, phy, 0x19000, 0x1000
|
|
ota_0, app, ota_0, 0x20000, 0x600000
|
|
ota_1, app, ota_1, 0x620000, 0x600000
|
|
coredump, data, coredump, 0xc20000, 0x10000
|