e.g. 0.0.1-1d613b1: the first part is set by hand, the hash says which
commit was built. No dirty flag (the build always patches cspot).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The version is now set by hand in version.txt, so it's readable and only
changes on purpose. git describe gave commit hashes, and always "-dirty"
because the build applies patches to the cspot submodule. Editing the file
is enough; the next build picks it up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Picks the port, checks ESP32-P4 / chip revision against the image header /
32 MB flash, optionally erases, writes the images from build/flash_args,
reads the boot log for the IP and sets hostname, stream/Spotify name and
multicast address over the API. All questions also work as options.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The firmware doesn't apply the VLAN split yet (phase 2). The checkbox is
hidden, which also keeps the internet-interface fields and "Web UI / API on"
hidden; the markup stays for phase 2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The player now owns the effective mode (config or override) and passes it
down: spotify_apply(enable) and hls_set_url(url) instead of both reading
source.mode from the config. /api/player/source forces spotify|hls|off
(config returns to the saved mode), /api/player/url plays an m3u8 now;
neither is saved. GET reports it in `forced`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Follows /api/player's position, moves on locally between polls while
playing, seeks on release; disabled when the source can't seek.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
seek {ms} runs on the Spotify session task like a seek from the app (buffer
flushed, app notified). volume {value}|{delta} sets the player volume and
pushes it to the session, so the app's slider follows; setRemoteVolume now
also runs on the session task.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
play/pause/toggle/stop/next/prev. Spotify commands run on the session task
(same thread as cspot's frame handling) and the POST waits until they ran,
so it answers the new state. HLS pause stops fetching and resume rejoins at
the live edge; next/prev on HLS and anything on tone/off return 409.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Source, state, artist/title/album, position and duration (from cspot's
playback state, so it matches the app), volume and `can`. cspot patch 0004
adds read getters for the playback state and context.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No Spotify session (or paused, with failover_on_pause) for failover_delay_s
switches to HLS; Spotify playing switches back within ~1 s. Switches fade
out/in over 30 ms and flush the ring. HLS is suspended while Spotify plays.
cspot is held back instead of drained while it isn't Spotify's turn: it keeps
decoding on pause, so dropping its frames let it race through the queue.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- spotify_init() sets up the logger, zeroconf routes and session task
once; spotify_apply() (at boot and on every source save) enables or
disables: enabled = mode spotify/auto + credentials. Disable removes
the mDNS entry, zeroconf answers 404 and a running session ends
(loop exits within 200 ms, SpircHandler::disconnect stops the queue
and player tasks). A new device name ends the session and
re-advertises. The login blob is swapped under a mutex.
- Verified: hls/spotify/rename switch the mDNS entry and /spotify_info
(404/200) live; switching to hls during Spotify playback ended the
session in < 2 s, HLS played after ~5 s, internal heap 221 -> 365 KB
(cspot frees everything).
- CLAUDE.md: OTA-with-session findings (intermittent, flash-write stalls
seen as TX resyncs during uploads), serial-port reset caveat.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An upload during an active Spotify session crawled (~10 kB/s, 197 s)
and ended in a reset (seen twice). Workaround:
- aes67_ota_on_update(cb): cb(true) right before an accepted upload
writes flash, cb(false) if it then fails.
- The player pauses Spotify (spotify_pause -> SpircHandler::setPause, the
app follows) and suspends HLS fetching (hls_suspend); resumed if the
upload fails. AES67 TX keeps running (silence).
- Verified: upload during Spotify playback paused the session and
installed in 25.8 s (normal for 2 MB), clean reboot and self-test.
Root cause still open (noted in CLAUDE.md with the other cspot items).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HLS plays on AES67; list what to come back to (clock drift vs PTP,
download speed, untested cases) before moving on to cspot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- main/decoder: MPEG-TS demux (packets reassembled across HTTP chunks,
PAT -> PMT -> first ADTS-AAC PID, PES headers stripped) feeding the
esp_audio_codec simple AAC decoder (ADTS, AAC-Plus enabled for HE-AAC
v1/v2 variants). 7.3 only counts and logs PCM per segment.
- esp_audio_codec pinned to ~2.5.0: 2.6+ needs P4 rev >= 3 (this board
is rev 1.3). Noted in CLAUDE.md, also for esp_audio_effects < 1.4.
- The library's combined TS decoder lost ~8% of the frames (segments
decoded to 7.9-9.6 s, "decode error -1"); with the own demux every
segment is sample exact: 441344 / 440320 frames = 10.008 / 9.985 s,
matching EXTINF 10.0078 / 9.9846 (431 / 430 AAC frames), no errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No official Tailscale client exists for ESP32: evaluate a Tailscale
subnet router on the LAN (no firmware change) or WireGuard on the device.
API authentication is a prerequisite before remote exposure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Planned SNTP client: servers as names or IPs, several allowed, resolved
via DNS. Seeds the PTP clock with real time before becoming GM (today it
starts at 1970) and gives syslog timestamps. Added to the phase 2 list
in CLAUDE.md and as a section in aes67-core-base.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- As TimeReceiver in ptp.mode hybrid: Delay_Req unicast to the GM (IP
from its Announce, MAC recorded by the RX hook from its Sync frames),
unicastFlag set.
- As TimeTransmitter: a Delay_Req with the unicastFlag gets a unicast
Delay_Resp; multicast requests get multicast replies.
- EMAC timestamps every received frame (en_ts4all): its PTP filter left
unicast Delay_Req unstamped ("no HW RX timestamp").
- A unicast Delay_Resp's logMessageInterval 0x7F is ignored (use
ptp.log_delay_req); log_us() clamps to -7..6 (the shift was undefined).
- Verified vs ptp4l --hybrid_e2e 1: board hybrid TimeReceiver 18
Delay_Req in 20 s, all answered, locked; board TimeTransmitter
(p1 100): tcpdump shows Sync/Follow_Up/Announce to 224.0.1.129,
Delay_Req 192.168.192.233 -> .244 [unicast] and Delay_Resp .244 ->
.233 [unicast] within 0.4 ms; ptp4l s2.
- Docs: TimeTransmitter/hybrid notes; step 6 ticked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SAP, syslog and health/temperatures are done and verified. The VLAN
split needs a tagged VLAN with DHCP on the switch and is only needed
for the internet sources, so it moves to a phase 2 section. Step 4
notes what is still open (Riedel import, Wireshark).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Web UI PTP panel checked in the browser.
- GM loss test (ptp4l stopped): SLAVE -> LISTENING after the announce
timeout, frequency held; ptp4l restarted: UNCALIBRATED -> SLAVE in 22 s.
- Docs: P4 PTP implementation notes (UDP timestamp bit, RX hook, raw
Delay_Req, servo, measured results, link asymmetry).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Test on board (ESP32-P4 rev v1.3):
- Rejected with 400 and nothing booted differently: garbage, wrong
project, min chip rev v3.0, truncated image.
- A (USB, ota_0) -> B via /api/ota: self-test passed, confirmed.
- Manual rollback B -> A; A -> B again.
- B -> C (forced self-test failure): C boots on trial in ota_0, fails,
rolls back to B in ota_1.
- D installed over the network; a later truncated upload hides
'previous' and clears can_rollback.
Docs: network flash command, serial-reset caveat, rollback test build,
OTA details in aes67-core-base.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- aes67_net/lldp.c: IEEE 802.1AB LLDPDU sent as a raw frame with
esp_eth_transmit every 30 s (TTL 120 s) and immediately on a new IP
or hostname change. TLVs: chassis/port ID (MAC), port description,
system name (net.hostname), system description (project + version),
capabilities station-only, IPv4 management address.
- Docs: LLDP in the core Network section; step 2a ticked.
- Verified on an HP 2530-8G-PoE+ (show lldp info remote-device 2): all
fields shown, management address 192.168.192.244.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- aes67_net: espressif/mdns 1.13.1 (managed component, pinned in
dependencies.lock). Advertises <net.hostname>.local and the web UI as
_http._tcp port 80. net apply callback renames live.
- First config value actually applied: net.hostname.
- Docs: mDNS in the core Network section; build order gets step 2a
(mDNS, then LLDP).
- Verified on board: p4-aes67.local resolves via raw mDNS and getent,
http://p4-aes67.local/ answers, service shows in _http._tcp browse;
live rename to p4-rename and back works (after ~1 s probing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- aes67_board: Waveshare ESP32-P4-ETH pin profile and EMAC + IP101 driver
install (PHY addr 1, reset GPIO51, ref clock in on GPIO50).
- aes67_net: Ethernet netif with DHCP client; logs link up/down (speed,
duplex, MAC) and the DHCP lease.
- Verified on board: 100 Mbps full duplex, DHCP lease in ~8 s, ping
0% loss, ~0.2 ms RTT.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Board checked with esptool: ESP32-P4 rev v1.3 (engineering silicon),
32 MB GigaDevice flash. Rev <3 support and 32 MB set in sdkconfig.defaults.
- OTA partition layout: nvs, otadata, phy_init, ota_0/ota_1 (6 MB each,
below 16 MB), coredump; no factory app. Partition table at 0x10000 so
the bootloader can grow.
- App rollback enabled in the bootloader from the start.
- PROJECT_VER from git describe --tags --always --dirty.
- Empty stubs for the nine aes67_* core components; main logs version
and chip revision.
- Built with ESP-IDF v5.5.5; not yet flashed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bsncubed