Commit Graph

7 Commits

Author SHA1 Message Date
bsncubed 30c32e702b Step 2a (2/2): LLDP transmit, switch shows name and IP
- aes67_net/lldp.c: IEEE 802.1AB LLDPDU sent as a raw frame with
  esp_eth_transmit every 30 s (TTL 120 s) and immediately on a new IP
  or hostname change. TLVs: chassis/port ID (MAC), port description,
  system name (net.hostname), system description (project + version),
  capabilities station-only, IPv4 management address.
- Docs: LLDP in the core Network section; step 2a ticked.
- Verified on an HP 2530-8G-PoE+ (show lldp info remote-device 2): all
  fields shown, management address 192.168.192.244.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 23:14:09 +10:00
bsncubed 979420a6bb Step 2a (1/2): mDNS hostname.local and _http._tcp
- aes67_net: espressif/mdns 1.13.1 (managed component, pinned in
  dependencies.lock). Advertises <net.hostname>.local and the web UI as
  _http._tcp port 80. net apply callback renames live.
- First config value actually applied: net.hostname.
- Docs: mDNS in the core Network section; build order gets step 2a
  (mDNS, then LLDP).
- Verified on board: p4-aes67.local resolves via raw mDNS and getent,
  http://p4-aes67.local/ answers, service shows in _http._tcp browse;
  live rename to p4-rename and back works (after ~1 s probing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 23:08:51 +10:00
bsncubed 8e52401e9c Step 2 verified: web UI checked in browser
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 23:05:10 +10:00
bsncubed 69b4e18118 Step 1: Ethernet up (IP101/RMII), DHCP, link and IP logged
- aes67_board: Waveshare ESP32-P4-ETH pin profile and EMAC + IP101 driver
  install (PHY addr 1, reset GPIO51, ref clock in on GPIO50).
- aes67_net: Ethernet netif with DHCP client; logs link up/down (speed,
  duplex, MAC) and the DHCP lease.
- Verified on board: 100 Mbps full duplex, DHCP lease in ~8 s, ping
  0% loss, ~0.2 ms RTT.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 22:52:08 +10:00
bsncubed b391b962a7 Step 0 verified on board: boots rev v1.3 build, 32 MB, OTA layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 22:48:46 +10:00
bsncubed bbfd3506bf Step 0: IDF project skeleton for esp32p4 with core component stubs
- Board checked with esptool: ESP32-P4 rev v1.3 (engineering silicon),
  32 MB GigaDevice flash. Rev <3 support and 32 MB set in sdkconfig.defaults.
- OTA partition layout: nvs, otadata, phy_init, ota_0/ota_1 (6 MB each,
  below 16 MB), coredump; no factory app. Partition table at 0x10000 so
  the bootloader can grow.
- App rollback enabled in the bootloader from the start.
- PROJECT_VER from git describe --tags --always --dirty.
- Empty stubs for the nine aes67_* core components; main logs version
  and chip revision.
- Built with ESP-IDF v5.5.5; not yet flashed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 22:47:21 +10:00
bsncubed 07f44f2ccc Upload files to "/" 2026-09-23 21:51:44 +10:00