bbfd3506bf
- Board checked with esptool: ESP32-P4 rev v1.3 (engineering silicon), 32 MB GigaDevice flash. Rev <3 support and 32 MB set in sdkconfig.defaults. - OTA partition layout: nvs, otadata, phy_init, ota_0/ota_1 (6 MB each, below 16 MB), coredump; no factory app. Partition table at 0x10000 so the bootloader can grow. - App rollback enabled in the bootloader from the start. - PROJECT_VER from git describe --tags --always --dirty. - Empty stubs for the nine aes67_* core components; main logs version and chip revision. - Built with ESP-IDF v5.5.5; not yet flashed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
19 lines
797 B
Plaintext
19 lines
797 B
Plaintext
CONFIG_IDF_TARGET="esp32p4"
|
|
|
|
# OTA layout (partitions.csv): two app slots, no factory
|
|
CONFIG_PARTITION_TABLE_CUSTOM=y
|
|
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
|
|
# Bootloader had only 6% free below 0x8000; moved so it can grow (e.g. secure boot) without a relayout
|
|
CONFIG_PARTITION_TABLE_OFFSET=0x10000
|
|
|
|
# Rollback lives in the bootloader, which is only ever flashed over USB: enable it from the start
|
|
CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
|
|
|
|
# Board has engineering silicon v1.3 (esptool chip_id). Rev <3 binaries don't run on rev 3 and vice versa.
|
|
CONFIG_ESP32P4_SELECTS_REV_LESS_V3=y
|
|
CONFIG_ESP32P4_REV_MIN_100=y
|
|
|
|
# 32 MB flash (esptool flash_id: GigaDevice c8/4019). App slots stay below 16 MB;
|
|
# cache mapping above 16 MB is experimental in IDF.
|
|
CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y
|