bsncubed 2522901918 PTP: don't report the pre-step offset ...

After a clock step, status.ptp showed the whole step (~1.79e18 ns) as
offset_ns until the next Sync, and the 60 s summary reported it as
max |offset|. Offset is reset to 0 and the summary restarts on a step.
Verified: status goes 0 -> pull-in values; first summary max 24960 ns.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-09-25 07:08:42 +10:00

..

include

Step 4.1: /stream.sdp from the live config and PTP GM

2026-09-25 06:38:55 +10:00

aes67_ptp.c

Step 4.1: /stream.sdp from the live config and PTP GM

2026-09-25 06:38:55 +10:00

CMakeLists.txt

Step 3.2: TimeReceiver measurement (GM selection, Delay_Req/Resp, path delay)

2026-09-24 23:50:46 +10:00

ptp_clock.c

PTP: don't report the pre-step offset

2026-09-25 07:08:42 +10:00

ptp_clock.h

Step 4.1: /stream.sdp from the live config and PTP GM

2026-09-25 06:38:55 +10:00

ptp_hw.c

Step 3.3a: PTP servo, clock locks to the GM

2026-09-25 06:15:26 +10:00

ptp_hw.h

Step 3.3a: PTP servo, clock locks to the GM

2026-09-25 06:15:26 +10:00