Added factory reset todo item

Licences: MIT for the AES67 core and web page, GPL-3.0 for the rest
2026-09-27 22:19:42 +10:00 · 2026-09-27 08:37:38 +10:00 · 2026-09-27 08:34:19 +10:00 · 2026-09-27 08:27:04 +10:00 · 2026-09-26 08:51:33 +10:00 · 2026-09-26 08:48:46 +10:00
25 changed files with 1358 additions and 57 deletions
@@ -3,3 +3,4 @@ sdkconfig
 sdkconfig.old
 managed_components/
 build-*/
 tools/__pycache__/
@@ -15,6 +15,7 @@ Repo: https://gitea.apointless.space/bsncubed/aes67-ESP32-P4
 - After every change: `idf.py build`, flash, and check the serial monitor output. Show the relevant log lines.
 - Don't mark a step done until it has been verified on the board.
 - Keep core and project separate: `components/aes67_*` must not depend on `main/` (sources/player). Project code plugs in through the config, status and route registries.
 - Licences: core (`components/aes67_*`) and `web/` are MIT, the rest GPL-3.0-or-later (see THIRD_PARTY.md). Never pull GPL code (cspot, bell, squeezelite) into the core. New third-party code: check its licence first and add it to THIRD_PARTY.md.
 - `web/index.html`: keep the CORE / PROJECT markers. If the firmware needs an API change, change the doc and the page together.
 - Small, focused commits per step.
@@ -28,6 +29,7 @@ Repo: https://gitea.apointless.space/bsncubed/aes67-ESP32-P4
  - Rev < 3 also limits Espressif's prebuilt audio libraries: `esp_audio_codec` must stay < 2.6 and `esp_audio_effects` < 1.4 (newer versions use P4 assembly that needs rev >= 3; the build fails with a message saying so). Check this for any new Espressif binary component.
 - Embed `web/index.html` via `EMBED_TXTFILES` in `aes67_web`.
 - cspot (Spotify, `external/cspot` git submodule, philippe44 fork, pinned): after cloning run `git submodule update --init external/cspot && git -C external/cspot submodule update --init cspot/bell`. Its nanopb code generator needs, in the IDF Python env: `python -m pip install protobuf grpcio-tools 'setuptools<81'` (after `. export.sh`). Our fixes to cspot/bell live in `components/spotify/patches/{cspot,bell}/*.patch` and are applied automatically at configure time; don't edit the submodule directly, add a patch.
 - Firmware version: `<version.txt>-<git short hash>`, e.g. `0.0.1-1d613b1`. Bump `version.txt` for a release; the hash is the commit that was built (commit first, then build, so it matches). No dirty flag.
 - Flash over the network (normal way since step 2b; keep USB for recovery):
  `curl -f --data-binary @build/aes67_p4.bin -H 'Content-Type: application/octet-stream' http://p4-aes67/api/ota`
  The board reboots into the new image on trial; check `GET /api/ota` shows the new version with `pending_verify: false`.
@@ -43,7 +45,7 @@ Repo: https://gitea.apointless.space/bsncubed/aes67-ESP32-P4
 - On-die temperature sensor only (driver/temperature_sensor.h).
 ## Build order / status
- [x] 0. Check chip revision and flash size; create IDF project and empty component stubs (layout in aes67-core-base.md). Set up the OTA partition table (two app slots, no factory) and PROJECT_VER from git now, so the layout never changes later.
+- [x] 0. Check chip revision and flash size; create IDF project and empty component stubs (layout in aes67-core-base.md). Set up the OTA partition table (two app slots, no factory) and PROJECT_VER now, so the layout never changes later. (PROJECT_VER = `version.txt` + git short hash.)
 - [x] 1. Ethernet: IP101 up, DHCP, IP logged. Ping works.
 - [x] 2. Web server + config store (cJSON in NVS) + embedded index.html; /api/config, /api/status (stub values), /api/reboot.
 - [x] 2a. Finding the device: mDNS (hostname.local + _http._tcp), then LLDP (switch shows name + IP).
@@ -52,7 +54,7 @@ Repo: https://gitea.apointless.space/bsncubed/aes67-ESP32-P4
 - [ ] 4. AES67 TX with a 1 kHz test tone, PTP-paced; /stream.sdp. Verify: import SDP on a Riedel Artist 4-wire AES67 port, and check packets/timestamps in Wireshark.
  Done and checked with a receiver script (all ptimes, L16/L24, tone phase-locked to PTP); still open: the Riedel import and a Wireshark capture.
 - [x] 5. SAP discovery, then syslog, then health/temperatures (one at a time). VLAN split moved to phase 2.
- [x] 6. PTP TimeTransmitter: BMCA roles (auto/master), hybrid mode.
+- [x] 6. PTP TimeTransmitter: BMCA roles (slave/auto; the separate "master" role was dropped later, auto with a low priority1 does the same), hybrid mode.
 - [ ] 7. Sources: HLS player, then cspot (Spotify Connect), then failover + /api/player.
  - [x] 7.1-7.4 HLS plays on AES67 (PSRAM ring, TS demux + AAC, 44.1 -> 48 kHz). Tested with Triple J Hottest (TS, AAC-LC 44.1k).
  - [ ] Come back to HLS (open items):
@@ -72,10 +74,27 @@ Repo: https://gitea.apointless.space/bsncubed/aes67-ESP32-P4
    - Open: `aes67_tx resync` (TX 20-27 ms late) ~11 s after each switch to Spotify (seen 3 times); clicks at switches not yet checked in a recording; HLS start sometimes hits CDN read timeouts.
  - [x] /api/player: GET, transport, seek, volume (the app follows), source override and url (runtime, not saved); web UI progress bar.
 - [ ] 8. Mono sum, gain, polish.
  - [x] Mono sum: stereo source mapped to a 1-channel stream in the core ((L+R)/2, 64 bit). Checked: 156 B packets, SDP L24/48000/1.
  - [x] Gain: source.gain_db as a trim on top of the volume, saturating. Checked: -12 dB = -12 dB peak, +12 dB clips at 0 dBFS.
  - [x] Pink noise source (-18 dBFS RMS, octaves flat within 0.4 dB 63 Hz-4 kHz).
  - [x] 48 kHz only (96 kHz dropped: all sources are 48 kHz).
  - [x] Network: status mask/gw/dns, UI shows the lease; static IP (reboot on change, validation).
  - [x] Web UI: sticky save bar, dark default + light toggle, progress bar, PTP panel (2 min average offset, details), uptime d/h/m/s, VLAN option hidden, no hw_ts / preferred-TimeTransmitter options.
  - [x] Versioning `<version.txt>-<git hash>`; tools/flash_board.py (tested on this board); docs/user-guide.md.
  - [ ] Mute at 0 % volume: confirm on the board.
 ## Phase 2 (parked)
 - [ ] Replace the Espressif binary audio libraries (GPL-3 conflict, see THIRD_PARTY.md): AAC via opencore-aacdec (Apache-2.0, in bell/external), 44.1 -> 48 kHz via the Speex resampler (BSD). Do together with / right before the clock-drift correction (Speex can steer the ratio).
 - [ ] Clock-drift correction (do before AirPlay): steer the 44.1 -> 48 kHz converter by a few ppm from the ring level / distance to the live edge, so push sources that run on the sender's clock don't slowly over- or underrun. Closes the HLS clock-drift item in step 7; AirPlay needs the same.
 - [ ] AirPlay 1 (RAOP) as a source: `_raop._tcp` via our mDNS, RTSP control, AES (mbedTLS), ALAC decode, RTP audio + timing, 44.1 kHz into the existing converter, uses the clock-drift correction. Start from philippe44's RAOP code in squeezelite-esp32 (`components/raop`, checked 2026-09-27 at commit 1d542bd):
  - Take `raop.c`, `util.c` (MIT, philippe44) and `rtp.c` (MIT, James Laird/shairport); keep their headers. Write our own glue to the player (their `raop_sink.c` has no licence header and the repo has no LICENSE file; it's specific to squeezelite anyway).
  - ALAC: they link a prebuilt `libalac.a`; build Apple's ALAC from source instead (Apache-2.0, already in `external/cspot/cspot/bell/external/alac`).
  - `dmap_parser.c` (track metadata) has no header: confirm its origin (likely the MIT dmap-parser project) or leave it out.
  - `raop.c` contains the AirPort Express RSA private key (reverse-engineered in 2011, in every AirPlay 1 receiver): known grey area.
  - Code is written for squeezelite-esp32's platform (pthreads, their logging, OpenSSL/mbedTLS switches, NVS): needs porting like cspot. `rtp.c` hands each frame to the sink with its play time (NTP-synced to the sender); following the sender's clock is the sink's job, i.e. our clock-drift correction. Covers iPhone/iPad/Mac (incl. Tidal and Apple Music apps) and Windows via AirPlay senders (TuneBlade, Airfoil). Not AirPlay 2 (HomeKit pairing, its own PTP on ports 319/320 clashes with ours). Then: auto mode as a priority list (whichever source plays wins, HLS as fallback). Check internal heap with Spotify + AirPlay sessions (buffers to PSRAM).
 - [ ] VLAN split: AES67 untagged + internet tagged (inet.vlan_id/pcp), per aes67-core-base.md "Network". Needs a tagged VLAN with DHCP on the switch port. Config group `inet` and the UI fields exist already; nothing is applied yet. The "VLAN split" checkbox is hidden in web/index.html (`<label hidden>`); unhide it when this is done.
 - [ ] NTP (SNTP): servers as hostnames or IPs (e.g. `pool.ntp.org`, several allowed; names resolved via DNS, re-resolved on failure). Uses: seed the PTP clock with real time before becoming GM (today it starts at 1970), syslog timestamps. Needs a `time` config group + UI fields (change doc and page together).
 - [ ] Factory reset buton in the webgui with a confromation popup.
 ## Phase 3 (parked)
 - [ ] Remote access via VPN / Tailscale. There is no official Tailscale client for ESP32; options to evaluate first:
@@ -1,19 +1,21 @@
 cmake_minimum_required(VERSION 3.16)
-# Firmware version = git describe (tags, dirty flag). Reported by esp_app_get_description()
+# Firmware version = "<version.txt>-<git short hash>", e.g. 0.0.1-1d613b1. The first part is set by
-# and in status.fw / GET /api/ota. CMake re-runs when git's HEAD log or index changes (commit,
+# hand in version.txt; the hash says which commit was built (no dirty flag: the build always patches
-# checkout, add), so the version follows. A new tag or unstaged edits need `idf.py reconfigure`.
+# the cspot submodule). Reported by esp_app_get_description(), status.fw and GET /api/ota.
 # CMake re-runs when version.txt or the checked-out commit changes.
 set_property(DIRECTORY APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS
-    ${CMAKE_CURRENT_LIST_DIR}/.git/logs/HEAD
+    ${CMAKE_CURRENT_LIST_DIR}/version.txt
-    ${CMAKE_CURRENT_LIST_DIR}/.git/index)
+    ${CMAKE_CURRENT_LIST_DIR}/.git/logs/HEAD)
 file(STRINGS ${CMAKE_CURRENT_LIST_DIR}/version.txt PROJECT_VER LIMIT_COUNT 1)
 execute_process(
-    COMMAND git describe --tags --always --dirty
+    COMMAND git rev-parse --short HEAD
    WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}
-    OUTPUT_VARIABLE PROJECT_VER
+    OUTPUT_VARIABLE GIT_HASH
    OUTPUT_STRIP_TRAILING_WHITESPACE
    ERROR_QUIET)
-if(NOT PROJECT_VER)
+if(GIT_HASH)
-    set(PROJECT_VER "0.0.0-nogit")
+    set(PROJECT_VER "${PROJECT_VER}-${GIT_HASH}")
 endif()
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
@@ -0,0 +1,674 @@
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007
 Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.
                            Preamble
  The GNU General Public License is a free, copyleft license for
 software and other kinds of works.
  The licenses for most software and other practical works are designed
 to take away your freedom to share and change the works.  By contrast,
 the GNU General Public License is intended to guarantee your freedom to
 share and change all versions of a program--to make sure it remains free
 software for all its users.  We, the Free Software Foundation, use the
 GNU General Public License for most of our software; it applies also to
 any other work released this way by its authors.  You can apply it to
 your programs, too.
  When we speak of free software, we are referring to freedom, not
 price.  Our General Public Licenses are designed to make sure that you
 have the freedom to distribute copies of free software (and charge for
 them if you wish), that you receive source code or can get it if you
 want it, that you can change the software or use pieces of it in new
 free programs, and that you know you can do these things.
  To protect your rights, we need to prevent others from denying you
 these rights or asking you to surrender the rights.  Therefore, you have
 certain responsibilities if you distribute copies of the software, or if
 you modify it: responsibilities to respect the freedom of others.
  For example, if you distribute copies of such a program, whether
 gratis or for a fee, you must pass on to the recipients the same
 freedoms that you received.  You must make sure that they, too, receive
 or can get the source code.  And you must show them these terms so they
 know their rights.
  Developers that use the GNU GPL protect your rights with two steps:
 (1) assert copyright on the software, and (2) offer you this License
 giving you legal permission to copy, distribute and/or modify it.
  For the developers' and authors' protection, the GPL clearly explains
 that there is no warranty for this free software.  For both users' and
 authors' sake, the GPL requires that modified versions be marked as
 changed, so that their problems will not be attributed erroneously to
 authors of previous versions.
  Some devices are designed to deny users access to install or run
 modified versions of the software inside them, although the manufacturer
 can do so.  This is fundamentally incompatible with the aim of
 protecting users' freedom to change the software.  The systematic
 pattern of such abuse occurs in the area of products for individuals to
 use, which is precisely where it is most unacceptable.  Therefore, we
 have designed this version of the GPL to prohibit the practice for those
 products.  If such problems arise substantially in other domains, we
 stand ready to extend this provision to those domains in future versions
 of the GPL, as needed to protect the freedom of users.
  Finally, every program is threatened constantly by software patents.
 States should not allow patents to restrict development and use of
 software on general-purpose computers, but in those that do, we wish to
 avoid the special danger that patents applied to a free program could
 make it effectively proprietary.  To prevent this, the GPL assures that
 patents cannot be used to render the program non-free.
  The precise terms and conditions for copying, distribution and
 modification follow.
                       TERMS AND CONDITIONS
  0. Definitions.
  "This License" refers to version 3 of the GNU General Public License.
  "Copyright" also means copyright-like laws that apply to other kinds of
 works, such as semiconductor masks.
  "The Program" refers to any copyrightable work licensed under this
 License.  Each licensee is addressed as "you".  "Licensees" and
 "recipients" may be individuals or organizations.
  To "modify" a work means to copy from or adapt all or part of the work
 in a fashion requiring copyright permission, other than the making of an
 exact copy.  The resulting work is called a "modified version" of the
 earlier work or a work "based on" the earlier work.
  A "covered work" means either the unmodified Program or a work based
 on the Program.
  To "propagate" a work means to do anything with it that, without
 permission, would make you directly or secondarily liable for
 infringement under applicable copyright law, except executing it on a
 computer or modifying a private copy.  Propagation includes copying,
 distribution (with or without modification), making available to the
 public, and in some countries other activities as well.
  To "convey" a work means any kind of propagation that enables other
 parties to make or receive copies.  Mere interaction with a user through
 a computer network, with no transfer of a copy, is not conveying.
  An interactive user interface displays "Appropriate Legal Notices"
 to the extent that it includes a convenient and prominently visible
 feature that (1) displays an appropriate copyright notice, and (2)
 tells the user that there is no warranty for the work (except to the
 extent that warranties are provided), that licensees may convey the
 work under this License, and how to view a copy of this License.  If
 the interface presents a list of user commands or options, such as a
 menu, a prominent item in the list meets this criterion.
  1. Source Code.
  The "source code" for a work means the preferred form of the work
 for making modifications to it.  "Object code" means any non-source
 form of a work.
  A "Standard Interface" means an interface that either is an official
 standard defined by a recognized standards body, or, in the case of
 interfaces specified for a particular programming language, one that
 is widely used among developers working in that language.
  The "System Libraries" of an executable work include anything, other
 than the work as a whole, that (a) is included in the normal form of
 packaging a Major Component, but which is not part of that Major
 Component, and (b) serves only to enable use of the work with that
 Major Component, or to implement a Standard Interface for which an
 implementation is available to the public in source code form.  A
 "Major Component", in this context, means a major essential component
 (kernel, window system, and so on) of the specific operating system
 (if any) on which the executable work runs, or a compiler used to
 produce the work, or an object code interpreter used to run it.
  The "Corresponding Source" for a work in object code form means all
 the source code needed to generate, install, and (for an executable
 work) run the object code and to modify the work, including scripts to
 control those activities.  However, it does not include the work's
 System Libraries, or general-purpose tools or generally available free
 programs which are used unmodified in performing those activities but
 which are not part of the work.  For example, Corresponding Source
 includes interface definition files associated with source files for
 the work, and the source code for shared libraries and dynamically
 linked subprograms that the work is specifically designed to require,
 such as by intimate data communication or control flow between those
 subprograms and other parts of the work.
  The Corresponding Source need not include anything that users
 can regenerate automatically from other parts of the Corresponding
 Source.
  The Corresponding Source for a work in source code form is that
 same work.
  2. Basic Permissions.
  All rights granted under this License are granted for the term of
 copyright on the Program, and are irrevocable provided the stated
 conditions are met.  This License explicitly affirms your unlimited
 permission to run the unmodified Program.  The output from running a
 covered work is covered by this License only if the output, given its
 content, constitutes a covered work.  This License acknowledges your
 rights of fair use or other equivalent, as provided by copyright law.
  You may make, run and propagate covered works that you do not
 convey, without conditions so long as your license otherwise remains
 in force.  You may convey covered works to others for the sole purpose
 of having them make modifications exclusively for you, or provide you
 with facilities for running those works, provided that you comply with
 the terms of this License in conveying all material for which you do
 not control copyright.  Those thus making or running the covered works
 for you must do so exclusively on your behalf, under your direction
 and control, on terms that prohibit them from making any copies of
 your copyrighted material outside their relationship with you.
  Conveying under any other circumstances is permitted solely under
 the conditions stated below.  Sublicensing is not allowed; section 10
 makes it unnecessary.
  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
  No covered work shall be deemed part of an effective technological
 measure under any applicable law fulfilling obligations under article
 11 of the WIPO copyright treaty adopted on 20 December 1996, or
 similar laws prohibiting or restricting circumvention of such
 measures.
  When you convey a covered work, you waive any legal power to forbid
 circumvention of technological measures to the extent such circumvention
 is effected by exercising rights under this License with respect to
 the covered work, and you disclaim any intention to limit operation or
 modification of the work as a means of enforcing, against the work's
 users, your or third parties' legal rights to forbid circumvention of
 technological measures.
  4. Conveying Verbatim Copies.
  You may convey verbatim copies of the Program's source code as you
 receive it, in any medium, provided that you conspicuously and
 appropriately publish on each copy an appropriate copyright notice;
 keep intact all notices stating that this License and any
 non-permissive terms added in accord with section 7 apply to the code;
 keep intact all notices of the absence of any warranty; and give all
 recipients a copy of this License along with the Program.
  You may charge any price or no price for each copy that you convey,
 and you may offer support or warranty protection for a fee.
  5. Conveying Modified Source Versions.
  You may convey a work based on the Program, or the modifications to
 produce it from the Program, in the form of source code under the
 terms of section 4, provided that you also meet all of these conditions:
    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.
    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".
    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.
    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.
  A compilation of a covered work with other separate and independent
 works, which are not by their nature extensions of the covered work,
 and which are not combined with it such as to form a larger program,
 in or on a volume of a storage or distribution medium, is called an
 "aggregate" if the compilation and its resulting copyright are not
 used to limit the access or legal rights of the compilation's users
 beyond what the individual works permit.  Inclusion of a covered work
 in an aggregate does not cause this License to apply to the other
 parts of the aggregate.
  6. Conveying Non-Source Forms.
  You may convey a covered work in object code form under the terms
 of sections 4 and 5, provided that you also convey the
 machine-readable Corresponding Source under the terms of this License,
 in one of these ways:
    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.
    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.
    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.
    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.
    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.
  A separable portion of the object code, whose source code is excluded
 from the Corresponding Source as a System Library, need not be
 included in conveying the object code work.
  A "User Product" is either (1) a "consumer product", which means any
 tangible personal property which is normally used for personal, family,
 or household purposes, or (2) anything designed or sold for incorporation
 into a dwelling.  In determining whether a product is a consumer product,
 doubtful cases shall be resolved in favor of coverage.  For a particular
 product received by a particular user, "normally used" refers to a
 typical or common use of that class of product, regardless of the status
 of the particular user or of the way in which the particular user
 actually uses, or expects or is expected to use, the product.  A product
 is a consumer product regardless of whether the product has substantial
 commercial, industrial or non-consumer uses, unless such uses represent
 the only significant mode of use of the product.
  "Installation Information" for a User Product means any methods,
 procedures, authorization keys, or other information required to install
 and execute modified versions of a covered work in that User Product from
 a modified version of its Corresponding Source.  The information must
 suffice to ensure that the continued functioning of the modified object
 code is in no case prevented or interfered with solely because
 modification has been made.
  If you convey an object code work under this section in, or with, or
 specifically for use in, a User Product, and the conveying occurs as
 part of a transaction in which the right of possession and use of the
 User Product is transferred to the recipient in perpetuity or for a
 fixed term (regardless of how the transaction is characterized), the
 Corresponding Source conveyed under this section must be accompanied
 by the Installation Information.  But this requirement does not apply
 if neither you nor any third party retains the ability to install
 modified object code on the User Product (for example, the work has
 been installed in ROM).
  The requirement to provide Installation Information does not include a
 requirement to continue to provide support service, warranty, or updates
 for a work that has been modified or installed by the recipient, or for
 the User Product in which it has been modified or installed.  Access to a
 network may be denied when the modification itself materially and
 adversely affects the operation of the network or violates the rules and
 protocols for communication across the network.
  Corresponding Source conveyed, and Installation Information provided,
 in accord with this section must be in a format that is publicly
 documented (and with an implementation available to the public in
 source code form), and must require no special password or key for
 unpacking, reading or copying.
  7. Additional Terms.
  "Additional permissions" are terms that supplement the terms of this
 License by making exceptions from one or more of its conditions.
 Additional permissions that are applicable to the entire Program shall
 be treated as though they were included in this License, to the extent
 that they are valid under applicable law.  If additional permissions
 apply only to part of the Program, that part may be used separately
 under those permissions, but the entire Program remains governed by
 this License without regard to the additional permissions.
  When you convey a copy of a covered work, you may at your option
 remove any additional permissions from that copy, or from any part of
 it.  (Additional permissions may be written to require their own
 removal in certain cases when you modify the work.)  You may place
 additional permissions on material, added by you to a covered work,
 for which you have or can give appropriate copyright permission.
  Notwithstanding any other provision of this License, for material you
 add to a covered work, you may (if authorized by the copyright holders of
 that material) supplement the terms of this License with terms:
    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or
    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or
    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or
    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or
    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or
    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.
  All other non-permissive additional terms are considered "further
 restrictions" within the meaning of section 10.  If the Program as you
 received it, or any part of it, contains a notice stating that it is
 governed by this License along with a term that is a further
 restriction, you may remove that term.  If a license document contains
 a further restriction but permits relicensing or conveying under this
 License, you may add to a covered work material governed by the terms
 of that license document, provided that the further restriction does
 not survive such relicensing or conveying.
  If you add terms to a covered work in accord with this section, you
 must place, in the relevant source files, a statement of the
 additional terms that apply to those files, or a notice indicating
 where to find the applicable terms.
  Additional terms, permissive or non-permissive, may be stated in the
 form of a separately written license, or stated as exceptions;
 the above requirements apply either way.
  8. Termination.
  You may not propagate or modify a covered work except as expressly
 provided under this License.  Any attempt otherwise to propagate or
 modify it is void, and will automatically terminate your rights under
 this License (including any patent licenses granted under the third
 paragraph of section 11).
  However, if you cease all violation of this License, then your
 license from a particular copyright holder is reinstated (a)
 provisionally, unless and until the copyright holder explicitly and
 finally terminates your license, and (b) permanently, if the copyright
 holder fails to notify you of the violation by some reasonable means
 prior to 60 days after the cessation.
  Moreover, your license from a particular copyright holder is
 reinstated permanently if the copyright holder notifies you of the
 violation by some reasonable means, this is the first time you have
 received notice of violation of this License (for any work) from that
 copyright holder, and you cure the violation prior to 30 days after
 your receipt of the notice.
  Termination of your rights under this section does not terminate the
 licenses of parties who have received copies or rights from you under
 this License.  If your rights have been terminated and not permanently
 reinstated, you do not qualify to receive new licenses for the same
 material under section 10.
  9. Acceptance Not Required for Having Copies.
  You are not required to accept this License in order to receive or
 run a copy of the Program.  Ancillary propagation of a covered work
 occurring solely as a consequence of using peer-to-peer transmission
 to receive a copy likewise does not require acceptance.  However,
 nothing other than this License grants you permission to propagate or
 modify any covered work.  These actions infringe copyright if you do
 not accept this License.  Therefore, by modifying or propagating a
 covered work, you indicate your acceptance of this License to do so.
  10. Automatic Licensing of Downstream Recipients.
  Each time you convey a covered work, the recipient automatically
 receives a license from the original licensors, to run, modify and
 propagate that work, subject to this License.  You are not responsible
 for enforcing compliance by third parties with this License.
  An "entity transaction" is a transaction transferring control of an
 organization, or substantially all assets of one, or subdividing an
 organization, or merging organizations.  If propagation of a covered
 work results from an entity transaction, each party to that
 transaction who receives a copy of the work also receives whatever
 licenses to the work the party's predecessor in interest had or could
 give under the previous paragraph, plus a right to possession of the
 Corresponding Source of the work from the predecessor in interest, if
 the predecessor has it or can get it with reasonable efforts.
  You may not impose any further restrictions on the exercise of the
 rights granted or affirmed under this License.  For example, you may
 not impose a license fee, royalty, or other charge for exercise of
 rights granted under this License, and you may not initiate litigation
 (including a cross-claim or counterclaim in a lawsuit) alleging that
 any patent claim is infringed by making, using, selling, offering for
 sale, or importing the Program or any portion of it.
  11. Patents.
  A "contributor" is a copyright holder who authorizes use under this
 License of the Program or a work on which the Program is based.  The
 work thus licensed is called the contributor's "contributor version".
  A contributor's "essential patent claims" are all patent claims
 owned or controlled by the contributor, whether already acquired or
 hereafter acquired, that would be infringed by some manner, permitted
 by this License, of making, using, or selling its contributor version,
 but do not include claims that would be infringed only as a
 consequence of further modification of the contributor version.  For
 purposes of this definition, "control" includes the right to grant
 patent sublicenses in a manner consistent with the requirements of
 this License.
  Each contributor grants you a non-exclusive, worldwide, royalty-free
 patent license under the contributor's essential patent claims, to
 make, use, sell, offer for sale, import and otherwise run, modify and
 propagate the contents of its contributor version.
  In the following three paragraphs, a "patent license" is any express
 agreement or commitment, however denominated, not to enforce a patent
 (such as an express permission to practice a patent or covenant not to
 sue for patent infringement).  To "grant" such a patent license to a
 party means to make such an agreement or commitment not to enforce a
 patent against the party.
  If you convey a covered work, knowingly relying on a patent license,
 and the Corresponding Source of the work is not available for anyone
 to copy, free of charge and under the terms of this License, through a
 publicly available network server or other readily accessible means,
 then you must either (1) cause the Corresponding Source to be so
 available, or (2) arrange to deprive yourself of the benefit of the
 patent license for this particular work, or (3) arrange, in a manner
 consistent with the requirements of this License, to extend the patent
 license to downstream recipients.  "Knowingly relying" means you have
 actual knowledge that, but for the patent license, your conveying the
 covered work in a country, or your recipient's use of the covered work
 in a country, would infringe one or more identifiable patents in that
 country that you have reason to believe are valid.
  If, pursuant to or in connection with a single transaction or
 arrangement, you convey, or propagate by procuring conveyance of, a
 covered work, and grant a patent license to some of the parties
 receiving the covered work authorizing them to use, propagate, modify
 or convey a specific copy of the covered work, then the patent license
 you grant is automatically extended to all recipients of the covered
 work and works based on it.
  A patent license is "discriminatory" if it does not include within
 the scope of its coverage, prohibits the exercise of, or is
 conditioned on the non-exercise of one or more of the rights that are
 specifically granted under this License.  You may not convey a covered
 work if you are a party to an arrangement with a third party that is
 in the business of distributing software, under which you make payment
 to the third party based on the extent of your activity of conveying
 the work, and under which the third party grants, to any of the
 parties who would receive the covered work from you, a discriminatory
 patent license (a) in connection with copies of the covered work
 conveyed by you (or copies made from those copies), or (b) primarily
 for and in connection with specific products or compilations that
 contain the covered work, unless you entered into that arrangement,
 or that patent license was granted, prior to 28 March 2007.
  Nothing in this License shall be construed as excluding or limiting
 any implied license or other defenses to infringement that may
 otherwise be available to you under applicable patent law.
  12. No Surrender of Others' Freedom.
  If conditions are imposed on you (whether by court order, agreement or
 otherwise) that contradict the conditions of this License, they do not
 excuse you from the conditions of this License.  If you cannot convey a
 covered work so as to satisfy simultaneously your obligations under this
 License and any other pertinent obligations, then as a consequence you may
 not convey it at all.  For example, if you agree to terms that obligate you
 to collect a royalty for further conveying from those to whom you convey
 the Program, the only way you could satisfy both those terms and this
 License would be to refrain entirely from conveying the Program.
  13. Use with the GNU Affero General Public License.
  Notwithstanding any other provision of this License, you have
 permission to link or combine any covered work with a work licensed
 under version 3 of the GNU Affero General Public License into a single
 combined work, and to convey the resulting work.  The terms of this
 License will continue to apply to the part which is the covered work,
 but the special requirements of the GNU Affero General Public License,
 section 13, concerning interaction through a network will apply to the
 combination as such.
  14. Revised Versions of this License.
  The Free Software Foundation may publish revised and/or new versions of
 the GNU General Public License from time to time.  Such new versions will
 be similar in spirit to the present version, but may differ in detail to
 address new problems or concerns.
  Each version is given a distinguishing version number.  If the
 Program specifies that a certain numbered version of the GNU General
 Public License "or any later version" applies to it, you have the
 option of following the terms and conditions either of that numbered
 version or of any later version published by the Free Software
 Foundation.  If the Program does not specify a version number of the
 GNU General Public License, you may choose any version ever published
 by the Free Software Foundation.
  If the Program specifies that a proxy can decide which future
 versions of the GNU General Public License can be used, that proxy's
 public statement of acceptance of a version permanently authorizes you
 to choose that version for the Program.
  Later license versions may give you additional or different
 permissions.  However, no additional obligations are imposed on any
 author or copyright holder as a result of your choosing to follow a
 later version.
  15. Disclaimer of Warranty.
  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
 APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
 HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
 OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
 THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
 IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
 ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
  16. Limitation of Liability.
  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
 WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
 THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
 GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
 USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
 DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
 PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
 EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
 SUCH DAMAGES.
  17. Interpretation of Sections 15 and 16.
  If the disclaimer of warranty and limitation of liability provided
 above cannot be given local legal effect according to their terms,
 reviewing courts shall apply local law that most closely approximates
 an absolute waiver of all civil liability in connection with the
 Program, unless a warranty or assumption of liability accompanies a
 copy of the Program in return for a fee.
                     END OF TERMS AND CONDITIONS
            How to Apply These Terms to Your New Programs
  If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it
 free software which everyone can redistribute and change under these terms.
  To do so, attach the following notices to the program.  It is safest
 to attach them to the start of each source file to most effectively
 state the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <https://www.gnu.org/licenses/>.
 Also add information on how to contact you by electronic and paper mail.
  If the program does terminal interaction, make it output a short
 notice like this when it starts in an interactive mode:
    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.
 The hypothetical commands `show w' and `show c' should show the appropriate
 parts of the General Public License.  Of course, your program's commands
 might be different; for a GUI interface, you would use an "about box".
  You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
 For more information on this, and how to apply and follow the GNU GPL, see
 <https://www.gnu.org/licenses/>.
  The GNU General Public License does not permit incorporating your program
 into proprietary programs.  If your program is a subroutine library, you
 may consider it more useful to permit linking proprietary applications with
 the library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.  But first, please read
 <https://www.gnu.org/licenses/why-not-lgpl.html>.
@@ -1,10 +1,28 @@
 # aes67-ESP32-P4
-AES67 sender for the Waveshare ESP32-P4-ETH (PoE): Spotify Connect and HLS/m3u8 streams out as an AES67 multicast stream, PTP-locked, with a simple web UI for settings and SDP export.
+AES67 sender for the Waveshare ESP32-P4-ETH (PoE): Spotify Connect and HLS/m3u8 internet radio (with failover between them) go out as an AES67 multicast stream, locked to PTP. Everything is set up from a built-in web page, with SAP announcements and SDP export for receivers (tested with Riedel PTP).
- `docs/aes67-core-base.md` — reusable AES67 core design (PTP, RTP, SDP/SAP, VLAN, syslog, web UI contract)
+**Using it:** see the [user guide](docs/user-guide.md).
 - `docs/hardware-and-design-notes.md` — board details and project-specific design
 - `web/index.html` — web UI (served by the device)
 - `CLAUDE.md` — working rules and build order
-Status: design complete, firmware not started. See the build order in CLAUDE.md.
+**Quick start:** power the board over PoE and open http://p4-aes67.local/. Pick a source and save. Then find "P4 AES67" via SAP on the receiver, or import the SDP from the page.
 ## Building and flashing
 - ESP-IDF 5.5 or later, target `esp32p4`: `idf.py set-target esp32p4 && idf.py build`
 - cspot submodule: `git submodule update --init external/cspot && git -C external/cspot submodule update --init cspot/bell`
 - New board over USB: `tools/flash_board.py`
 - Update over the network: web page → Firmware, or `curl -f --data-binary @build/aes67_p4.bin -H 'Content-Type: application/octet-stream' http://p4-aes67.local/api/ota`
 Toolchain details and caveats (chip revision, Python packages for cspot) are in `CLAUDE.md`.
 ## Documentation
 - `docs/user-guide.md`: setup, web page, sources, Spotify, AES67, PTP, network, updates, player API, troubleshooting
 - `docs/aes67-core-base.md`: reusable AES67 core design (PTP, RTP, SDP/SAP, syslog, web UI and API contract)
 - `docs/hardware-and-design-notes.md`: board details and project-specific design
 - `web/index.html`: the web page (served by the device)
 - `CLAUDE.md`: working rules, build order and status
 ## Licence
 The AES67 core (`components/aes67_*`) and the web page (`web/`) are MIT. Everything else is GPL-3.0-or-later (`LICENSE`). The firmware image contains cspot (GPL-3.0), so distributing it falls under GPL-3.0. Third-party code, its licences and a known conflict with two Espressif binary libraries: [THIRD_PARTY.md](THIRD_PARTY.md).
@@ -0,0 +1,37 @@
 # Licences
 ## This project
 | Part | Licence |
 |---|---|
 | AES67 core: `components/aes67_*` (each has its own `LICENSE`) | MIT |
 | Web page: `web/index.html` (`web/LICENSE`) | MIT |
 | Everything else: `main/`, `components/spotify/` (incl. our cspot/bell patches), `tools/`, docs, build files | GPL-3.0-or-later (`LICENSE`) |
 The core is MIT so it can be reused in other AES67 projects, including closed ones. It must not depend on GPL code: nothing in `components/aes67_*` may include or link cspot or `main/`.
 The firmware image as a whole contains cspot (GPL-3.0), so anyone who distributes the firmware (a `.bin` or a flashed board) must do so under GPL-3.0, with the complete corresponding source.
 ## Third-party code in the firmware
 | Code | Used for | Licence | Notes |
 |---|---|---|---|
 | [cspot](https://github.com/philippe44/cspot) (philippe44 fork, `external/cspot`) | Spotify Connect | GPL-3.0-or-later | Our patches: `components/spotify/patches/cspot` |
 | [bell](https://github.com/philippe44/bell) (cspot submodule) | cspot's I/O and utilities | no licence file | Part of the cspot project; licence to be confirmed with the author |
 | tremor (via bell) | Vorbis decoding (Spotify) | BSD-3-Clause (Xiph.Org) | |
 | nanopb (via bell) | Protobuf (Spotify protocol) | zlib | |
 | ESP-IDF, incl. mbedTLS, esp_http_server, esp_eth | Platform, TLS, web server, Ethernet | Apache-2.0 | mbedTLS is dual Apache-2.0 / GPL-2.0-or-later |
 | lwIP | TCP/IP | BSD-3-Clause | |
 | FreeRTOS | RTOS | MIT | |
 | cJSON | JSON | MIT | |
 | espressif/mdns | mDNS | Apache-2.0 | |
 | **espressif/esp_audio_codec** | AAC decoding (HLS) | **Espressif Modified MIT, prebuilt binary** | Only allowed with Espressif chips; no source |
 | **espressif/esp_audio_effects**, gmf_fft | 44.1 → 48 kHz conversion | **Espressif Modified MIT**; esp_audio_effects is a prebuilt binary | as above |
 Algorithms: pink noise uses Paul Kellet's filter and a xorshift32 generator (both public domain).
 ## Known conflict
 The two Espressif binary libraries can't be distributed under GPL-3.0: there is no source, and "Espressif chips only" is an additional restriction that GPL-3.0 forbids. A firmware image containing both them and cspot therefore can't be distributed in line with GPL-3.0. Private use is not affected.
 Planned fix (phase 2 in `CLAUDE.md`): replace them with open code, e.g. opencore-aacdec (Apache-2.0, already in `bell/external`) for AAC and the Speex resampler (BSD) for the sample-rate conversion. The Speex resampler can also do the fine rate steering the clock-drift correction needs.
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -1,7 +1,10 @@
 #include "aes67_ptp.h"
 #include <string.h>
 #include "aes67_cfg.h"
 #include "aes67_web.h"
 #include "esp_log.h"
 #include "ptp_clock.h"
 #include "ptp_hw.h"
@@ -9,12 +12,12 @@
 static const char PTP_DEFAULTS[] =
    "{\"mode\":\"multicast\",\"role\":\"auto\",\"domain\":0,\"priority1\":250,\"priority2\":250,"
    "\"log_sync\":0,\"log_announce\":1,\"announce_timeout\":3,\"log_delay_req\":0,"
-    "\"dscp\":46,\"hw_ts\":true}";
+    "\"dscp\":46}";     // hardware timestamps always (status.ptp.hw_ts)
 static bool ptp_validate(const cJSON *g, char *err, size_t n)
 {
    static const char *const modes[] = { "multicast", "hybrid", NULL };
-    static const char *const roles[] = { "slave", "auto", "master", NULL };
+    static const char *const roles[] = { "slave", "auto", NULL };
    return cfg_check_enum(g, "mode", modes, err, n) &&
           cfg_check_enum(g, "role", roles, err, n) &&
           cfg_check_int(g, "domain", 0, 127, err, n) &&
@@ -34,7 +37,20 @@ static void ptp_apply(const cJSON *g)
 esp_err_t aes67_ptp_init(void)
 {
-    return cfg_register("ptp", PTP_DEFAULTS, ptp_validate, ptp_apply);
+    esp_err_t err = cfg_register("ptp", PTP_DEFAULTS, ptp_validate, ptp_apply);
    if (err != ESP_OK) {
        return err;
    }
    // Role "master" was dropped (it behaved like auto; a low priority1 does the same). Stored values
    // aren't re-validated, so convert it here.
    cJSON *c = cfg_get("ptp");
    bool master = !strcmp(cJSON_GetObjectItemCaseSensitive(c, "role")->valuestring, "master");
    cJSON_Delete(c);
    if (master) {
        ESP_LOGW("ptp", "stored role \"master\" is no longer offered: now \"auto\" (same behaviour)");
        cfg_set_string("ptp", "role", "auto", false);
    }
    return ESP_OK;
 }
 esp_err_t aes67_ptp_start(esp_eth_handle_t eth)
@@ -26,6 +26,7 @@
 #define MAX_DRIFT_PPB       500000.0
 #define WINDOW              64          // samples for interval/delay statistics
 #define SUMMARY_US          (60 * 1000000LL)
 #define AVG_S               120         // status.ptp.offset_avg_ns: mean |offset| over 2 min
 #define FLAG_PTP_TIMESCALE  0x0008      // flagField octet 1 bit 3
 #define FLAG_UNICAST        0x0400      // flagField octet 0 bit 2
 #define UTC_OFFSET          37          // TAI - UTC (s), announced as information only
@@ -102,8 +103,48 @@ static struct {
    uint32_t delay_req, delay_resp;
    uint8_t own_class;
    int64_t sum_max_ns, sum_start_us;
    // Mean |offset| over the last AVG_S seconds (status.ptp.offset_avg_ns): one bucket per second.
    struct {
        int64_t sec, sum;
        uint32_t n;
    } avg[AVG_S];
 } s;
 static void avg_add(int64_t offset)
 {
    int64_t sec = esp_timer_get_time() / 1000000;
    typeof(s.avg[0]) *b = &s.avg[sec % AVG_S];
    if (b->sec != sec) {
        b->sec = sec;
        b->sum = 0;
        b->n = 0;
    }
    b->sum += llabs(offset);
    b->n++;
 }
 static void avg_clear(void)
 {
    memset(s.avg, 0, sizeof(s.avg));
 }
 // False while no offset was measured in the window.
 static bool avg_get(double *mean)
 {
    int64_t now = esp_timer_get_time() / 1000000, sum = 0;
    uint32_t n = 0;
    for (int i = 0; i < AVG_S; i++) {
        if (s.avg[i].n && now - s.avg[i].sec < AVG_S) {
            sum += s.avg[i].sum;
            n += s.avg[i].n;
        }
    }
    if (n) {
        *mean = (double)sum / n;
    }
    return n > 0;
 }
 static void win_add(window_t *w, int64_t v)
 {
    w->v[w->next] = v;
@@ -309,6 +350,7 @@ static void servo(int64_t offset)
        s.stepped = true;
        s.offset_ns = 0;    // the pre-step offset is history: not for status or the summary
        s.sum_max_ns = 0;
        avg_clear();
        s.sum_start_us = 0;
        s.prev_t2 = 0;      // rate across the step is meaningless
        s.bad = 0;
@@ -323,6 +365,7 @@ static void servo(int64_t offset)
    s.drift_ppb = fmax(-MAX_DRIFT_PPB, fmin(MAX_DRIFT_PPB, s.drift_ppb + ki * offset));
    s.freq_ppb = -ppb;
    ptp_hw_adj_freq(s.freq_ppb);
    avg_add(offset);
    if (llabs(offset) < LOCK_NS) {
        s.bad = 0;
@@ -622,8 +665,8 @@ static void load_config(void)
    s.cfg_log_sync = cJSON_GetObjectItem(c, "log_sync")->valueint;
    s.cfg_log_announce = cJSON_GetObjectItem(c, "log_announce")->valueint;
    s.cfg_log_dreq = cJSON_GetObjectItem(c, "log_delay_req")->valueint;
-    // Roles (docs): slave = clockClass 255, never transmits; auto/master = 248 with the configured
+    // Roles (docs): slave = clockClass 255, never transmits; auto = 248 with the configured priorities
-    // priorities (auto 250/250 by default, master e.g. p1 100).
+    // (250/250 by default: loses to any real GM; a lower priority1 prefers this device).
    s.slave_only = strcmp(cJSON_GetObjectItem(c, "role")->valuestring, "slave") == 0;
    s.hybrid = strcmp(cJSON_GetObjectItem(c, "mode")->valuestring, "hybrid") == 0;
    s.own_class = s.slave_only ? 255 : 248;
@@ -711,7 +754,7 @@ static void ptp_task(void *arg)
            int tos2 = s.dscp << 2;
            setsockopt(s.gen, IPPROTO_IP, IP_TOS, &tos2, sizeof(tos2));
            ESP_LOGI(TAG, "config applied: role %s, mode %s, p1 %u p2 %u, domain %u",
-                     s.slave_only ? "slave" : "auto/master", s.hybrid ? "hybrid" : "multicast",
+                     s.slave_only ? "slave" : "auto", s.hybrid ? "hybrid" : "multicast",
                     s.own.p1, s.own.p2, s.domain);
            // Re-run the decision: a foreign GM worse than our new dataset is dropped; as
            // TimeTransmitter with role slave we stop.
@@ -838,6 +881,9 @@ void ptp_clock_status(cJSON *st)
        cJSON_AddBoolToObject(p, "gm_freq_traceable", s.gm.flags & 0x20);
        if (s.stepped) {
            cJSON_AddNumberToObject(p, "offset_ns", s.offset_ns);
            if (avg_get(&mean)) {
                cJSON_AddNumberToObject(p, "offset_avg_ns", round(mean));
            }
            cJSON_AddNumberToObject(p, "freq_ppb", round(s.freq_ppb));
        }
        if (s.delays.n) {
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -16,6 +16,7 @@
 #include "lwip/inet.h"
 #include "lwip/sockets.h"
 #define AES67_RATE      48000       // the only sample rate (all sources are 48 kHz)
 #define MAX_FRAMES      192         // 4 ms at 48 kHz
 #define MAX_CH          2
 #define RTP_HDR         12
@@ -56,7 +57,7 @@ static bool aes67_validate(const cJSON *g, char *err, size_t n)
 {
    static const char *const discovery[] = { "manual", "sap", NULL };
    static const char *const encodings[] = { "L16", "L24", NULL };
-    static const double rates[] = { 48000, 96000 };
+    static const double rates[] = { AES67_RATE };     // the sources (player, test signals) are 48 kHz
    static const double ptimes[] = { 0.125, 0.25, 0.333, 1, 4 };
    bool ok = cfg_check_str(g, "name", 1, 63, err, n) &&
@@ -67,7 +68,7 @@ static bool aes67_validate(const cJSON *g, char *err, size_t n)
              cfg_check_int(g, "dscp", 0, 63, err, n) &&
              cfg_check_int(g, "channels", 1, 2, err, n) &&
              cfg_check_enum(g, "encoding", encodings, err, n) &&
-              cfg_check_num_in(g, "rate", rates, 2, err, n) &&
+              cfg_check_num_in(g, "rate", rates, 1, err, n) &&
              cfg_check_num_in(g, "ptime", ptimes, 5, err, n) &&
              cfg_check_int(g, "pt", 96, 127, err, n) &&
              cfg_check_int(g, "ssrc", 0, 4294967295.0, err, n) &&
@@ -168,8 +169,6 @@ static int64_t samples_to_ns(int64_t s, int rate)
    return (s / rate) * 1000000000LL + ((s % rate) * 1000000000LL + rate - 1) / rate;
 }
 // 1 kHz tone, phase from the PTP sample index, so every sender's tone lines up.
 // One period is rate / 1000 samples (48 at 48 kHz, 96 at 96 kHz): precomputed table.
 // Pink noise: xorshift32 white noise through Paul Kellet's refined pink filter (within 0.05 dB
 // above 9 Hz). The scale gives -18 dBFS RMS (measured over 10 s; peaks about -6 dBFS).
 #define PINK_SCALE 0.0714f
@@ -209,9 +208,11 @@ static void to_mono(int32_t *buf, int frames, bool sum)
    }
 }
 // 1 kHz tone, phase from the PTP sample index, so every sender's tone lines up.
 // One period is rate / 1000 samples (48 at 48 kHz): precomputed table.
 static void tone(int32_t *buf, int frames, int channels, int rate, int64_t s0)
 {
-    static int32_t table[96000 / TONE_HZ];
+    static int32_t table[AES67_RATE / TONE_HZ];
    static int table_rate;
    int period = rate / TONE_HZ;
    if (table_rate != rate) {
@@ -361,5 +362,13 @@ esp_err_t aes67_tx_init(void)
    if (err != ESP_OK) {
        return err;
    }
    // Stored before 96 kHz was dropped: stored values aren't re-validated, so fix it here (SDP too).
    cJSON *a = cfg_get("aes67");
    double rate = cJSON_GetObjectItemCaseSensitive(a, "rate")->valuedouble;
    cJSON_Delete(a);
    if (rate != AES67_RATE) {
        ESP_LOGW(TAG, "stored sample rate %.0f not supported: using %d", rate, AES67_RATE);
        cfg_set_number("aes67", "rate", AES67_RATE, false);
    }
    return status_register(tx_status);
 }
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -295,6 +295,37 @@ esp_err_t cfg_set_number(const char *group, const char *key, double value, bool
    return err;
 }
 esp_err_t cfg_set_string(const char *group, const char *key, const char *value, bool apply)
 {
    if (!s_lock) {
        return ESP_ERR_INVALID_STATE;
    }
    xSemaphoreTake(s_lock, portMAX_DELAY);
    cfg_group_t *g = find(group);
    cJSON *cur = g ? cJSON_GetObjectItemCaseSensitive(g->values, key) : NULL;
    esp_err_t err = ESP_OK;
    if (!cur || !cJSON_IsString(cur)) {
        err = ESP_ERR_NOT_FOUND;
    } else {
        cJSON_ReplaceItemInObjectCaseSensitive(g->values, key, cJSON_CreateString(value));
        nvs_handle_t h;
        if (s_nvs_ok && (err = nvs_open(NVS_NAMESPACE, NVS_READWRITE, &h)) == ESP_OK) {
            err = store(h, g);
            if (err == ESP_OK) {
                err = nvs_commit(h);
            }
            nvs_close(h);
        }
    }
    cJSON *copy = err == ESP_OK && apply && g->apply ? cJSON_Duplicate(g->values, true) : NULL;
    xSemaphoreGive(s_lock);
    if (copy) {
        g->apply(copy);
        cJSON_Delete(copy);
    }
    return err;
 }
 /* ----- HTTP ----- */
 static esp_err_t config_get(httpd_req_t *req)
@@ -26,6 +26,8 @@ cJSON *cfg_get(const char *group);
 // Firmware-side change of one number (e.g. aes67.session_ver): stored like a POST, no validation.
 // apply = false skips the group's apply callback (e.g. to avoid restarting the stream).
 esp_err_t cfg_set_number(const char *group, const char *key, double value, bool apply);
 // Same for a string value.
 esp_err_t cfg_set_string(const char *group, const char *key, const char *value, bool apply);
 // Validation helpers for validate callbacks. Each returns false and fills err on failure.
 bool cfg_check_num(const cJSON *g, const char *key, double min, double max, char *err, size_t n);
@@ -13,13 +13,13 @@ Reference devices for UI and defaults: Riedel Bolero (PTP status), Riedel Direct
 - Status table values can be text or {cls: ok|warn|bad, text} for colour.
 - Device config is merged over defaults on load, so older firmware missing keys still renders.
 - Save bumps `aes67.session_ver` (SDP o= version). Save is blocked while any field is invalid (e.g. multicast out of range).
- UI uses IEEE 1588-2019 terms (TimeTransmitter / TimeReceiver), like Riedel. Config/API values stay master/slave/auto.
+- UI uses IEEE 1588-2019 terms (TimeTransmitter / TimeReceiver), like Riedel. Config/API values stay slave/auto.
 - AES67 fields carry Riedel Director-style "Default / Range" hints.
- PTP preset buttons: "Riedel SIC defaults" and "AES67 media profile defaults" fill the form (Save to apply).
+- PTP preset buttons: "Riedel PTP defaults" and "AES67 Media PTP defaults" fill the form (Save to apply).
 ## Config schema (core groups)
- ptp: {mode: multicast|hybrid, role: slave|auto|master, domain, priority1, priority2, log_sync, log_announce, announce_timeout, log_delay_req, dscp, hw_ts}
+- ptp: {mode: multicast|hybrid, role: slave|auto, domain, priority1, priority2, log_sync, log_announce, announce_timeout, log_delay_req, dscp} (hardware timestamps always; not configurable)
- aes67: {name, enabled, discovery: manual|sap, mcast, port, ttl, dscp, channels, mono_sum, encoding: L16|L24, rate, ptime, pt, ssrc, clk_offset, session_id, session_ver}
+- aes67: {name, enabled, discovery: manual|sap, mcast, port, ttl, dscp, channels, mono_sum, encoding: L16|L24, rate: 48000 only (all sources are 48 kHz), ptime, pt, ssrc, clk_offset, session_id, session_ver}
 - net: {hostname, vlan, web_on: both|inet|aes67, dhcp, ip, mask, gw, dns}   (AES67 / untagged interface)
 - inet: {vlan_id, pcp, dhcp, ip, mask, gw, dns}                            (internet / tagged, only if net.vlan)
 - log: {syslog, host, port, level: error|warn|info|debug, facility, format: rfc5424|rfc3164}
@@ -52,7 +52,7 @@ Reference devices for UI and defaults: Riedel Bolero (PTP status), Riedel Direct
 - Roles / BMCA dataset:
  - slave (TimeReceiver only): clockClass 255, never transmits time.
  - auto (default): clockClass 248, priority1 250, priority2 250. Loses to any real GM (Riedel default 128); takes over only if none.
-  - master (preferred TimeTransmitter): clockClass 248, priority1 100 (UI suggestion, editable).
+  - To prefer this device as TimeTransmitter, use auto with a lower priority1 (e.g. 100). (A separate "master" role was dropped: it behaved like auto; a stored "master" is converted to auto at boot.)
  - clockAccuracy 0xFE (unknown), offsetScaledLogVariance 0xFFFF, timeSource 0xA0 (internal oscillator).
  - clockIdentity = EUI-64 from MAC (xx-xx-xx-FF-FE-xx-xx-xx).
  - Note: Riedel Bolero reports its own clock class as 228.
@@ -76,15 +76,11 @@ Reference devices for UI and defaults: Riedel Bolero (PTP status), Riedel Direct
 | PTP State | state | INITIALIZING/LISTENING/UNCALIBRATED/SLAVE/MASTER/PASSIVE/FAULTY/DISABLED, shown as TimeReceiver/TimeTransmitter/… |
 | Lock State | locked | servo converged (e.g. \|offset\| < 1 µs for N consecutive syncs) |
 | TimeTransmitter | gm_id | shown as MAC + "(FFFE)" when EUI-64 from MAC |
-| Time Offset | offset_ns | Bolero brackets in ns: <100 (green), 100-500 (green), 500-1000 (amber), 1000-10000 (red), >10000 (red); exact value in brackets |
+| Time Offset (2 min avg) | offset_avg_ns | mean \|offset\| over the last 2 min (reset on a clock step); Bolero brackets in ns: <100 (green), 100-500 (green), 500-1000 (amber), 1000-10000 (red), >10000 (red). The current offset_ns is in Details |
 | Frequency Deviation | freq_ppb | servo frequency correction; buckets <100 ppb, 100-500 ppb, 500 ppb-1 ppm, 1-10 ppm, 10-50 ppm, >50 ppm |
 | Network Delay | path_delay_ns ± path_delay_sd_ns | mean path delay ± std dev over the rolling window |
 | Hops | steps_removed | |
 | Time/Frequency Traceable | gm_time_traceable, gm_freq_traceable | Announce flagField bits |
 | Version | version | 2 |
 | Own Clock Class | own_class | 255 / 248 per role |
-Details (collapsed): clock_id, gm_class, gm_accuracy, gm_p1, gm_p2, sync_avg_ms/min/max + sync_jitter_us (measured Sync interval over the last `window` = 64 messages; RX as receiver, TX as transmitter), announce_avg_ms, delay_req/delay_resp counters, hw_ts.
+Details (collapsed): clock_id, current offset_ns, gm_class, gm_accuracy, gm_p1, gm_p2, hops (steps_removed), time/frequency traceable (gm_time_traceable, gm_freq_traceable: Announce flagField bits), version (2), own clock class (own_class: 255 / 248 per role), sync_avg_ms/min/max + sync_jitter_us (measured Sync interval over the last `window` = 64 messages; RX as receiver, TX as transmitter), announce_avg_ms, delay_req/delay_resp counters, hw_ts.
 When this device is the GM, offset/frequency/delay show "–".
 ## AES67 TX
@@ -125,7 +121,7 @@ When this device is the GM, offset/frequency/delay show "–".
 ## Firmware update (OTA)
 - Partition table: nvs, otadata, phy_init, ota_0, ota_1 (no factory app). Size the slots from flash_id; e.g. on 16 MB, 2 × 6 MB leaves room for growth (cspot + TLS + codecs). Keep NVS outside the app slots so config survives updates.
- Version: `PROJECT_VER` from `git describe --tags --dirty`, read at runtime from `esp_app_get_description()`; also reported as `status.fw`.
+- Version: `PROJECT_VER` = `<version.txt>-<git short hash>` (e.g. `0.0.1-1d613b1`; the first part set by hand), read at runtime from `esp_app_get_description()`; also reported as `status.fw`.
 - API:
  - GET /api/ota -> {version, project, build_date, idf, running, previous, previous_version, pending_verify, can_rollback}
  - POST /api/ota: raw .bin as `application/octet-stream`, streamed with esp_ota_begin/write/end into the inactive slot (never buffered whole in RAM). 200 then reboot; 4xx with a message if rejected.
@@ -0,0 +1,230 @@
 # P4 AES67 Streamer: user guide
 The P4 AES67 Streamer turns Spotify Connect or an internet radio stream (HLS / m3u8) into an **AES67 multicast stream**, locked to your PTP clock. Any AES67 receiver on the network can play it: a Riedel Artist 4-wire port, a Dante device in AES67 mode, a DAW, and so on.
 It runs on a **Waveshare ESP32-P4-ETH** board, powered over PoE, and is set up entirely from a web page.
 Contents: [Getting started](#getting-started) · [The web page](#the-web-page) · [Sources](#sources) · [Spotify](#spotify) · [AES67 output](#aes67-output) · [PTP](#ptp) · [Network](#network) · [Logging](#logging) · [Firmware updates](#firmware-updates) · [Player API](#player-api) · [Troubleshooting](#troubleshooting) · [Limitations](#limitations)
 ---
 ## Getting started
 1. **Connect** the board's Ethernet port to a PoE switch port, or to a normal port and power it over USB-C. Use the same network (or VLAN) as your AES67 devices and your PTP grandmaster.
 2. **Wait about 20 seconds.** The board gets an address by DHCP and locks to PTP.
 3. **Open the web page** at **http://p4-aes67.local/**. Alternatively, look up the board's IP in your router's DHCP list (the name is `p4-aes67`) and open `http://<IP>/`.
 4. **Pick a source** under *Source* and click **Save** (see [Sources](#sources)).
 5. **On the receiver**, either find the stream via SAP, or copy the SDP from the page's *SDP* section (see [AES67 output](#aes67-output)).
 Out of the box the board streams **2-channel, 24-bit, 48 kHz audio with 1 ms packets to 239.69.1.10:5004** and announces it by SAP under the name "P4 AES67".
 > **More than one board?** Each board needs its own hostname, stream name and multicast address, or they clash. Change them under *Network* and *AES67 output*, or let `tools/flash_board.py` ask for them when you flash a new board.
 ---
 ## The web page
 The page is split into sections, from top to bottom:
 | Section | What it's for |
 |---|---|
 | **Status** | Firmware version, IP / MAC, link speed, active source, Spotify state, buffer, packets sent, underruns, uptime, memory, chip temperature. |
 | **PTP status** | Whether the clock is locked, which grandmaster it follows, the time offset (bracket of the 2-minute average) and path delay. *Details* shows the current offset, hops and more. |
 | **Player** | What's playing now, transport buttons, progress bar (drag to seek), volume. |
 | **Source**, **PTP**, **AES67 output**, **Network**, **Logging** | Settings. They take effect only when you click **Save**. |
 | **SDP** | The stream description, to copy or download for receivers. |
 | **Firmware** | Update the firmware (see [Firmware updates](#firmware-updates)). |
 **Saving:** *Save*, *Revert* (throw away unsaved edits) and *Reboot* stay at the bottom of the window while you scroll through the settings. Messages such as "Saved." or error texts appear next to them. Invalid values are rejected with the reason, and nothing is saved.
 **Light / dark:** the page is dark by default. The **◐** button at the top right switches to light, and your browser remembers the choice.
 ---
 ## Sources
 Choose the source under **Source → Source**:
 | Source | What it plays |
 |---|---|
 | **Spotify Connect** | The board appears as a speaker in the Spotify app (default). Needs your own Spotify app credentials; see [Spotify](#spotify). |
 | **HLS / M3U8 URL** | An internet radio stream, e.g. `https://…/playlist.m3u8`. Enter it under *Stream URL*. |
 | **Spotify, fail over to HLS** | Spotify when someone plays to it, otherwise the stream (see below). |
 | **Test tone** | 1 kHz sine at −18 dBFS, locked to PTP. For line-up and receiver tests. |
 | **Pink noise** | Pink noise at −18 dBFS RMS (peaks around −6 dBFS), the same signal on both channels. For level and EQ checks. |
 | **Off** | Silence. The stream keeps running. |
 ### Failover (Spotify, fail over to HLS)
 - **Spotify playing:** the board plays Spotify, switching over within about a second of pressing play.
 - **No Spotify connection:** after *Failover delay* seconds (default 5), the board switches to the HLS stream.
 - **Paused:** with **Also fail over when paused** ticked, a paused Spotify counts as "not playing" and the stream takes over after the delay. Unticked (default), a pause gives silence and the board stays on Spotify.
 - **Fades:** switches fade out and in over 30 ms, so there are no clicks.
 - **Resuming:** Spotify is held while the stream plays. When you press play again, the song continues where you paused.
 ### Volume and gain
 - **Volume (Player section):** the everyday volume. With Spotify it follows the app's volume slider, and the other way round.
 - **Output gain (dB):** a fixed trim on top of the volume, −60 to +12 dB. Above 0 dB, loud passages can clip at full scale.
 - **Neither affects** the test tone or pink noise. Those always come out at their calibrated level.
 ---
 ## Spotify
 Since 2025, Spotify requires every Spotify Connect device to use a **developer app registered to your own account**. You need **Spotify Premium**. Setup takes about five minutes:
 1. Go to **https://developer.spotify.com/dashboard** and log in.
 2. **Create app**:
   - Name and description: anything, e.g. "P4 AES67".
   - Redirect URI: `http://127.0.0.1:8888/callback`. Spotify requires one, but this device never uses it.
   - API: tick **Web API**, then save.
 3. Open the app's **Settings**. Copy the **Client ID**, and click *View client secret* to copy the **Client secret**.
 4. On the board's page under **Source**, paste them into **Spotify client ID** and **Spotify client secret**, then **Save**.
 The secret is write-only: after saving, the field shows empty. Leave it empty to keep the stored secret, or type a new one to replace it.
 **Connecting:** make sure your phone or computer is on the **same network** as the board. In the Spotify app, open the device list and pick **P4 AES67** (or the name you set under *Spotify device name*). Play, pause, skip, seek and volume all work from the app. The web page shows the track and position and can control playback too.
 - **Spotify bitrate:** 96, 160 or 320 kbit/s (default 320).
 - **Spotify device name:** the name shown in the app. Changing it disconnects a running session.
 - **Status → Spotify** shows the state: e.g. *waiting for Spotify app*, *connected*, *no client credentials*, *login failed*.
 ---
 ## AES67 output
 | Setting | Default | Notes |
 |---|---|---|
 | Stream name (s=) | P4 AES67 | The name receivers show. |
 | Enabled | on | Off stops sending. |
 | Discovery | SAP | **SAP**: announced every 30 s on 239.255.255.255:9875, so receivers that support SAP find it by themselves. **Manual**: no announcements; use the SDP. |
 | RTP multicast IP / port | 239.69.1.10 : 5004 | Must be unique per stream on your network. |
 | TTL | 32 | |
 | DSCP (media) | 34 (AF41) | QoS marking for the audio packets. |
 | Channels | 2 | 1 or 2. |
 | Mono sum | off | Sends (left + right) / 2 as a 1-channel stream. Forces *Channels* to 1; it can't clip. |
 | Bit depth | L24 | L24 or L16. |
 | Sample rate | 48000 | Fixed; all sources are 48 kHz. |
 | Packet time | 1 ms | 0.125, 0.25, 0.333, 1 or 4 ms. 1 ms is the AES67 default and works with nearly all receivers. |
 | Payload type / SSRC / time stamp offset | 96 / 0 / 0 | Only change these if a receiver needs it. |
 **Getting the SDP to a receiver:**
 - **SAP:** receivers that listen for SAP (Riedel, many AES67 devices) list the stream by its name.
 - **By hand:** in the *SDP* section, **Copy** or **Download .sdp** and import it on the receiver. The board also serves it at `http://p4-aes67.local/stream.sdp`.
 - **When the SDP changes:** after a setting that changes the stream, the SDP gets a new version number. Re-import it on receivers that were set up by hand.
 ---
 ## PTP
 The board locks its media clock to the PTP grandmaster on the network (IEEE 1588-2008, UDP/IPv4, E2E, always with hardware timestamps). *PTP status* shows the lock state and the grandmaster.
 | Setting | Default | Notes |
 |---|---|---|
 | Mode | multicast | **hybrid** sends the delay requests unicast (fewer multicast packets). |
 | Role | Auto | **TimeReceiver only**: never becomes grandmaster. **Auto**: becomes grandmaster only if there is none (fallback). To make this board the preferred grandmaster, keep *Auto* and set a low *Priority 1* (e.g. 100). |
 | Domain | 0 | Must match your grandmaster. |
 | Priority 1 / 2 | 250 / 250 | Lower wins the grandmaster election. |
 | Intervals, timeout, DSCP (46) | | Presets below set them. |
 **Presets:**
 - **Riedel PTP defaults:** TimeReceiver only, priorities 128/126, Riedel's intervals. Use this when a Riedel system provides the clock.
 - **AES67 Media PTP defaults:** the faster intervals of the AES67 profile.
 A preset only fills in the fields; click **Save** to apply them.
 Audio starts only when PTP is locked, usually about 20 s after power-up. When the board is itself the grandmaster (no other clock on the network), its clock starts at 1 January 1970. That's fine for AES67, but it isn't real time.
 ---
 ## Network
 - **Hostname:** the name in DHCP, mDNS (`<hostname>.local`) and LLDP (the switch's neighbour list). Changing it applies at once.
 - **DHCP (default):** with DHCP on, the greyed-out IP, netmask, gateway and DNS fields show the addresses DHCP handed out.
 - **Static IP:** untick **DHCP**. The current addresses stay in the fields as a starting point; edit them and **Save**. The board **reboots** to apply them, and the page switches to the new address after 20 s. The page checks that the netmask is valid, that the IP isn't the subnet's network or broadcast address, and that the gateway is in the subnet.
  - **A wrong static address makes the board unreachable** over the network. Double-check before saving; see [Troubleshooting](#troubleshooting) for recovery.
  - With a static IP, your router's DNS name for the board can go stale. `http://<hostname>.local/` keeps working.
 ---
 ## Logging
 The board can send its log to a syslog server (UDP):
 - Tick **Send to syslog** and enter the server (hostname or IP) and port (default 514).
 - **Minimum level:** Error, Warning, Info or Debug.
 - **Facility and format:** RFC 5424 or RFC 3164 (BSD).
 - **Send test message** checks the path.
 The log shows PTP lock/unlock, source switches, stream errors and firmware updates, which makes it useful for troubleshooting.
 ---
 ## Firmware updates
 **Over the network (normal way):** in the **Firmware** section, choose the new `aes67_p4.bin` and click **Upload & install**. The board installs it to its second firmware slot and reboots into it.
 - The new firmware must **prove itself** within 60 s: network up and web page answering. Only then is it kept. If it fails or crashes, the board automatically goes back to the previous firmware.
 - While the new firmware is on trial, the page offers **Keep this firmware** and **Roll back to previous**.
 - During the upload the Spotify session ends and the stream pauses. Reconnect from the app afterwards.
 - From a computer: `curl -f --data-binary @aes67_p4.bin -H 'Content-Type: application/octet-stream' http://p4-aes67.local/api/ota`
 **Over USB (new board, or recovery):** `tools/flash_board.py` (needs ESP-IDF or `pip install esptool`, plus a build). It:
 - checks the board (chip revision, 32 MB flash),
 - optionally erases it (this clears all settings),
 - flashes the firmware and finds the board's IP,
 - asks for a hostname, stream name and multicast address.
 **Making an update file:**
 1. Set the version in **`version.txt`** (first line, e.g. `0.0.2`) and commit your changes.
 2. Build: `idf.py build`. The firmware version becomes `<version>-<commit>`, e.g. `0.0.2-1d613b1`, as shown under *Firmware* and *Status*.
 3. The update file is **`build/aes67_p4.bin`**. Upload it in the *Firmware* section, or with the `curl` command above.
 The .bin is for ESP32-P4 chips of **revision v1.x** (the current Waveshare boards). A board with a v3 chip needs a build for that revision; the flash script refuses it with a hint.
 ---
 ## Player API
 Everything the Player section does is also available over HTTP, e.g. for a control panel or Companion. Every command returns the current player state as JSON.
 ```
 GET  /api/player                            state, source, track, position, volume
 POST /api/player/play | pause | toggle | stop | next | prev
 POST /api/player/seek     {"ms": 90000}
 POST /api/player/volume   {"value": 0-100}   or   {"delta": -5}
 POST /api/player/source   {"source": "spotify" | "hls" | "off" | "config"}
 POST /api/player/url      {"url": "https://…/playlist.m3u8"}
 ```
 Example: `curl -X POST http://p4-aes67.local/api/player/next`
 - **With Spotify:** the app follows every command. *stop* equals *pause*. *prev* restarts the song if it has played more than 3 s, like the Spotify apps.
 - **With HLS (live radio):** *pause* stops downloading, and *play* rejoins the live stream. *next*, *prev* and *seek* return an error (409).
 - **`source` and `url`:** temporary overrides; they're not saved, and a reboot or `"source": "config"` returns to the saved setting. `url` plays a stream right away.
 - **Security:** there is no password. Keep the device on a trusted network.
 The full device API (status, config, SDP, firmware) is described in `docs/aes67-core-base.md`.
 ---
 ## Troubleshooting
 | Problem | What to try |
 |---|---|
 | **Can't find the page** | Try `http://p4-aes67.local/`, or the IP from your router's DHCP list. If the board has a static IP you no longer know, use `tools/flash_board.py` over USB with erase (resets all settings). |
 | **Board doesn't appear in the Spotify app** | Phone or computer on the same network? *Status → Spotify* should say *waiting for Spotify app*. *no client credentials*: enter ID and secret. *login failed*: check them, and check that the account is Premium. |
 | **"Can't connect" in Spotify on the first try** | Try again; a second attempt usually works. |
 | **Spotify controls do nothing** after a long idle session | Quit and reopen the Spotify app, then connect again. |
 | **No audio at the receiver** | *PTP status* locked? *Status → AES67 TX* counting packets? The receiver on the same grandmaster and domain? After changing stream settings, re-import the SDP. |
 | **Stutter or dropouts** | *Status → underruns* rising? With HLS, check the internet connection. During a firmware upload short stutters are normal. |
 | **HLS stream doesn't start** | Check the URL in a browser. *Status → Source* shows *buffering* while it loads, usually for a few seconds. |
 ---
 ## Limitations
 These are known limitations in the current firmware:
 - **Autoplay stream on boot:** the checkbox has no effect yet. HLS always starts on boot.
 - **VLAN split** (separate VLANs for AES67 and internet) isn't available yet.
 - **No password** on the web page or API.
 - **HLS clock drift:** the radio station's clock and PTP drift slightly apart. Over many hours of continuous playback, the stream can skip ahead to catch up with the live edge.
@@ -0,0 +1 @@
 0.0.1
@@ -0,0 +1,21 @@
 MIT License
 Copyright (c) 2026 Ben Nicholson
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:
 The above copyright notice and this permission notice shall be included in all
 copies or substantial portions of the Software.
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
@@ -5,6 +5,7 @@
 <meta name="viewport" content="width=device-width,initial-scale=1">
 <title>AES67 device</title>
 <!--
  SPDX-License-Identifier: MIT (see web/LICENSE)
  AES67 device web UI – reusable base.
  CORE  : status, PTP, AES67 output, network/VLAN, logging, SDP. Keep identical across projects.
  PROJECT: blocks between "PROJECT START/END" markers (HTML and the PROJECT object in the script).
@@ -98,15 +99,14 @@ e.g. curl -X POST http://p4-aes67.local/api/player/next
 <!-- ===== PROJECT END ===== -->
 <fieldset><legend>PTP</legend>
-<button type="button" onclick="ptpPreset('riedel')">Riedel SIC defaults</button>
+<button type="button" onclick="ptpPreset('riedel')">Riedel PTP defaults</button>
-<button type="button" onclick="ptpPreset('aes67')">AES67 media profile defaults</button>
+<button type="button" onclick="ptpPreset('aes67')">AES67 Media PTP defaults</button>
 <label><span>Mode</span><select name="ptp.mode">
  <option value="multicast">multicast</option><option value="hybrid">hybrid</option></select>
  <small>hybrid: Delay_Req/Resp unicast</small></label>
 <label><span>Role</span><select name="ptp.role">
  <option value="slave">TimeReceiver only</option>
-  <option value="auto">Auto (TimeTransmitter if none)</option>
+  <option value="auto">Auto (TimeTransmitter if none)</option></select></label>
  <option value="master">Preferred TimeTransmitter</option></select></label>
 <label><span>Domain</span><input name="ptp.domain" type="number" min="0" max="127"></label>
 <label><span>Priority 1</span><input name="ptp.priority1" type="number" min="0" max="255"></label>
 <label><span>Priority 2</span><input name="ptp.priority2" type="number" min="0" max="255"></label>
@@ -122,7 +122,6 @@ e.g. curl -X POST http://p4-aes67.local/api/player/next
  <option value="-4">-4 (16/s)</option><option value="-3">-3 (8/s)</option><option value="-2">-2 (4/s)</option>
  <option value="-1">-1 (2/s)</option><option value="0">0 (1/s)</option><option value="1">1 (every 2 s)</option></select></label>
 <label><span>DSCP (PTP)</span><input name="ptp.dscp" type="number" min="0" max="63"></label>
 <label><span>HW timestamping</span><input name="ptp.hw_ts" type="checkbox"></label>
 <small>Transport UDP/IPv4 224.0.1.129 (ports 319/320), delay mechanism E2E.</small>
 </fieldset>
@@ -145,7 +144,7 @@ e.g. curl -X POST http://p4-aes67.local/api/player/next
  <small>(Ch 1 + Ch 2) / 2 → 1-channel stream</small></label>
 <label><span>Bit depth</span><select name="aes67.encoding"><option>L24</option><option>L16</option></select>
  <small>Default L24</small></label>
-<label><span>Sample rate</span><select name="aes67.rate"><option>48000</option><option>96000</option></select></label>
+<label><span>Sample rate</span><select name="aes67.rate"><option>48000</option></select></label>
 <label><span>Packet time</span><select name="aes67.ptime">
  <option value="0.125">0.125 ms</option><option value="0.25">0.250 ms</option><option value="0.333">0.333 ms</option>
  <option value="1">1.000 ms</option><option value="4">4.000 ms</option></select>
@@ -284,7 +283,7 @@ function showPlayer(p) {
 const CORE_DEF = {
  // Intervals follow Riedel SIC AES67 defaults; role/priorities are the "fallback TimeTransmitter" setup.
  ptp:{mode:'multicast',role:'auto',domain:0,priority1:250,priority2:250,log_sync:0,log_announce:1,
-       announce_timeout:3,log_delay_req:0,dscp:46,hw_ts:true},
+       announce_timeout:3,log_delay_req:0,dscp:46},
  aes67:{name:'AES67',enabled:true,mcast:'239.69.1.10',port:5004,ttl:32,dscp:34,pt:96,encoding:'L24',
         rate:'48000',channels:'2',ptime:'1',ssrc:0,clk_offset:0,mono_sum:false,discovery:'sap',session_id:1,session_ver:1},
  net:{hostname:'aes67',vlan:false,web_on:'both',dhcp:true,ip:'',mask:'',gw:'',dns:''},
@@ -292,7 +291,7 @@ const CORE_DEF = {
  log:{syslog:false,host:'',port:514,level:'info',facility:'16',format:'rfc5424'}
 };
 // Priority1 suggested when the role is changed in the UI (user can still edit it).
-const ROLE_P1 = {auto:250, master:100};
+const ROLE_P1 = {auto:250};
 // PTP presets. riedel = Riedel Director defaults for a SIC AES67 card.
 const PTP_PRESETS = {
  riedel: {mode:'multicast', role:'slave', domain:0, priority1:128, priority2:126,
@@ -303,7 +302,7 @@ function ptpPreset(name) {
  for (const [k, v] of Object.entries(PTP_PRESETS[name])) f['ptp.' + k].value = v;
  toggle(); sdp(); msg.textContent = `Loaded ${name} PTP defaults – Save to apply.`;
 }
-const CLOCK_CLASS = {slave:255, auto:248, master:248};
+const CLOCK_CLASS = {slave:255, auto:248};
 const $ = id => document.getElementById(id);
 const f = $('f'), sdpEl = $('sdp'), msg = $('msg');
@@ -460,7 +459,7 @@ function offsetBucket(ns) {
  // Same brackets and colours as Riedel Bolero.
  const [t, cls] = a < 100 ? ['< 100 ns','ok'] : a < 500 ? ['100-500 ns','ok'] : a < 1e3 ? ['500-1000 ns','warn']
                 : a < 1e4 ? ['1000-10000 ns','bad'] : ['> 10000 ns','bad'];
-  return {cls, text: `${t} (${n(ns)} ns)`};
+  return {cls, text: t};
 }
 function freqBucket(ppb) {
  if (ppb == null) return '–';
@@ -470,6 +469,13 @@ function freqBucket(ppb) {
  return `${t} (${n(ppb)} ppb)`;
 }
 const yn = v => v == null ? '–' : v ? 'Yes' : 'No';
 // 93784 -> "1d 2h 3m 4s"; leading zero units left out.
 function uptime(s) {
  if (s == null) return '–';
  const parts = [[Math.floor(s / 86400), 'd'], [Math.floor(s / 3600) % 24, 'h'], [Math.floor(s / 60) % 60, 'm'], [s % 60, 's']];
  const i = parts.findIndex(([v]) => v > 0);
  return parts.slice(i < 0 ? 3 : i).map(([v, u]) => v + u).join(' ');
 }
 function showPtp(p) {
  if (!p) { table($('ptpmore'), {}); return table($('ptpstat'), {'PTP': 'no data'}); }
@@ -478,18 +484,21 @@ function showPtp(p) {
    'PTP State': PTP_STATE[p.state] || p.state,
    'Lock State': p.locked ? {cls:'ok', text:'Locked'} : {cls:'bad', text:'Unlocked'},
    'TimeTransmitter': clockId(p.gm_id) + (gmSelf ? ' (this device)' : ''),
-    'Time Offset': gmSelf ? '–' : offsetBucket(p.offset_ns),
+    // Bracket from the mean |offset| over the last 2 min; the current value is in Details.
    'Time Offset (2 min avg)': gmSelf ? '–' : offsetBucket(p.offset_avg_ns),
    'Frequency Deviation': gmSelf ? '–' : freqBucket(p.freq_ppb),
    'Network Delay': gmSelf ? '–' : `${n(p.path_delay_ns)} ± ${n(p.path_delay_sd_ns)} ns`,
    'Hops': p.steps_removed,
    'Time/Frequency Traceable': `${yn(p.gm_time_traceable)} / ${yn(p.gm_freq_traceable)}`,
    'Version': p.version ?? 2,
    'Own Clock Class': p.own_class
  });
  table($('ptpmore'), {
    'This clock': clockId(p.clock_id),
    // Same colours as the average's brackets, for the current value.
    'Time offset now': gmSelf || p.offset_ns == null ? '–' : {cls: offsetBucket(p.offset_ns).cls, text: `${n(p.offset_ns)} ns`},
    'TT class / accuracy': `${p.gm_class ?? '–'} / 0x${(p.gm_accuracy ?? 0).toString(16).toUpperCase()}`,
    'TT priority 1 / 2': `${p.gm_p1 ?? '–'} / ${p.gm_p2 ?? '–'}`,
    'Hops': p.steps_removed ?? '–',
    'Time/Frequency Traceable': `${yn(p.gm_time_traceable)} / ${yn(p.gm_freq_traceable)}`,
    'Version': p.version ?? 2,
    'Own Clock Class': p.own_class ?? '–',
    // Measured over the last p.window Sync messages (RX as receiver, TX as transmitter).
    'Sync interval avg': `${n(p.sync_avg_ms, 3)} ms (min ${n(p.sync_min_ms, 3)} / max ${n(p.sync_max_ms, 3)}, jitter ${n(p.sync_jitter_us, 1)} µs)`,
    'Announce interval avg': n(p.announce_avg_ms, 1) + ' ms',
@@ -523,7 +532,7 @@ async function poll() {
      ...(st.power ? {'Power source': st.power} : {}),
      ...PROJECT.statusRows?.(st),
      'AES67 TX': `${st.tx_packets} pkts, ${st.underruns} underruns`,
-      'Uptime': st.uptime_s + ' s', 'Heap / PSRAM free': `${st.heap_free} / ${st.psram_free}`,
+      'Uptime': uptime(st.uptime_s), 'Heap / PSRAM free': `${st.heap_free} / ${st.psram_free}`,
      ...temps(st.temps)
    });
    showPtp(st.ptp);
@@ -544,7 +553,7 @@ async function otaInfo() {
  try {
    const o = await api('GET', '/api/ota');
    table($('fwinfo'), {
-      'Version': o.version, 'Project': o.project, 'Built': o.build_date, 'ESP-IDF': o.idf,
+      'Version': o.version,
      'Running slot': o.running, 'Previous slot': o.previous ? `${o.previous} (${o.previous_version ?? '?'})` : '–',
      'State': o.pending_verify ? {cls:'warn', text:'New firmware on trial – confirm or roll back'} : 'Confirmed'
    });
Author	SHA1	Message	Date
bsncubed	02c02a821d	Added factory reset todo item Added factory reset todo item	2026-09-27 22:19:42 +10:00
bsncubed	41103e3b5e	Licences: MIT for the AES67 core and web page, GPL-3.0 for the rest - LICENSE (GPL-3.0) at the root; an MIT LICENSE in each components/aes67_* and in web/, so they travel with the code when reused. - THIRD_PARTY.md: third-party code and licences, and the known conflict of the Espressif binary audio libraries with GPL-3.0 (firmware contains cspot). - CLAUDE.md: rule to keep GPL code out of the core; phase 2 item to replace the Espressif binaries (opencore-aacdec, Speex resampler). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-27 08:37:38 +10:00
bsncubed	c641671d24	CLAUDE.md: AirPlay 1 source check (licences, what to take, caveats) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-27 08:34:19 +10:00
bsncubed	4c16686c6b	CLAUDE.md: phase 2 gets clock-drift correction and AirPlay 1 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-27 08:27:04 +10:00
bsncubed	fd30ac3eb1	CLAUDE.md: autoplay off the to-do list Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 08:51:33 +10:00
bsncubed	e2721d6bd1	CLAUDE.md: step 8 status (mono sum, gain, polish done so far), step 6 roles Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 08:48:46 +10:00
bsncubed	d4aa9c7be1	PTP status: 2-min average offset, details split; uptime as d/h/m/s - Firmware: status.ptp.offset_avg_ns = mean \|offset\| over the last 2 min (one bucket per second, cleared on a clock step). - Main panel: Time Offset (2 min avg) shows only the Bolero bracket of the average. Details: the current offset (coloured by the same brackets), hops, time/frequency traceable, version and own clock class. - Uptime shown as "1d 2h 3m 4s". - Preset buttons renamed: "Riedel PTP defaults", "AES67 Media PTP defaults". Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 08:32:15 +10:00
bsncubed	5f27262b27	PTP: drop the "Preferred TimeTransmitter" role It behaved exactly like auto (clock class 248); the only difference was a priority1 suggestion in the page. Roles are now slave\|auto; to prefer this device, use auto with a low priority1. A stored "master" is converted to auto at boot (new cfg_set_string, like cfg_set_number). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 07:58:26 +10:00
bsncubed	ee03d9f9f1	PTP: hardware timestamping is not a setting any more The hw_ts config key was never read (hardware timestamps are always used); the checkbox suggested it could be turned off. Removed from the config, the page and the docs; status.ptp.hw_ts still reports it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 07:55:54 +10:00
bsncubed	ec65374e8d	Web UI: firmware table without build date, project and ESP-IDF Only version, slots and state are shown; GET /api/ota still reports them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 07:54:28 +10:00
bsncubed	214d6b2c29	Firmware version: <version.txt>-<git short hash>, starting at 0.0.1 e.g. 0.0.1-1d613b1: the first part is set by hand, the hash says which commit was built. No dirty flag (the build always patches cspot). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 07:52:23 +10:00
bsncubed	1d613b16c1	Firmware version from version.txt (0.9.0) instead of git describe The version is now set by hand in version.txt, so it's readable and only changes on purpose. git describe gave commit hashes, and always "-dirty" because the build applies patches to the cspot submodule. Editing the file is enough; the next build picks it up. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 07:41:53 +10:00
bsncubed	05f4ce45c3	48 kHz only: drop 96 kHz from the AES67 output All sources (player, test signals) are 48 kHz; at 96 kHz Spotify and HLS played at the wrong speed. Validation, the page and the docs allow 48000 only, and a 96000 stored before is reset to 48000 at boot (stored values aren't re-validated, and the SDP would still have said 96 kHz). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 07:30:39 +10:00
bsncubed	62b32c31ff	Docs: end-user guide; README brought up to date docs/user-guide.md covers setup, the web page, sources and failover, the Spotify developer app, AES67 output and SDP/SAP, PTP presets, network and static IP, logging, firmware updates (OTA and USB), the player API, troubleshooting and known limitations. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-26 07:26:52 +10:00