Commit Graph

4 Commits

Author SHA1 Message Date
bsncubed 122e46e862 Pink noise as a source (mode "pink")
Core: aes67_tx_pink_noise(), a ready-made TX source: xorshift32 white noise
through Paul Kellet's pink filter, -18 dBFS RMS (peaks about -6 dBFS), same
on L and R. The player uses it like the tone (straight to TX, no volume or
gain). Checked on the board: -18 dBFS RMS, octave bands 63 Hz-4 kHz flat
within +-0.4 dB, L = R.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-25 23:37:05 +10:00
bsncubed 5b0d7c9ba4 Step 7.5b3a: per-source PCM converter (audio_out), shared by HLS and Spotify
- main/audio_out: one converter instance per source (own rate converter
  state): s16 any rate/channels -> 48 kHz stereo int32 -> ring.
- player_write(src, ...) only writes for the active source, drops the
  rest; player_src_t is public in player.h.
- HLS decoder uses audio_out (no behaviour change).
- Verified: HLS still sample exact (441344 -> 480375 frames per
  10.008 s segment), buffer ~4 s, 0 underruns.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-25 18:34:15 +10:00
bsncubed 3ebb27e4bb Step 7.4: HLS audio on AES67 (44.1 -> 48 kHz into the ring)
- decoder: s16 PCM -> stereo int32 -> esp_ae_rate_cvt 44.1 -> 48 kHz
  (32-bit, complexity 3; bypassed at 48 kHz; mono duplicated) -> ring.
  esp_audio_effects pinned to ~1.3.0 (1.4+ needs P4 rev >= 3).
- hls: each segment is downloaded completely into PSRAM (max 4 MB), then
  decoded; the connection is not held open while the decoder waits for
  ring space at playback speed.
- player: player_write() blocks while the ring is full and gives up when
  the source changes; the temporary 440 Hz producer is removed.
- Verified with Triple J Hottest: 441344 -> 480375 frames (10.008 s) and
  440320 -> 479260 (9.985 s) per segment; RTP 15000 packets, 0 gaps,
  peak -10 dBFS / RMS -22 dBFS; ring ~4.0 s, 0 underruns over ~50 s;
  heap 422 KB, PSRAM 27.5 MB free.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-25 14:52:19 +10:00
bsncubed d3897f3179 Step 7.1: player plumbing (PSRAM ring -> AES67 TX), test tone mode
- main/audio_ring: SPSC ring of interleaved int32 frames in PSRAM
  (4 s at 48 kHz stereo), lock-free with acquire/release counters; the
  TX pull callback never blocks.
- main/player: source selection from source.mode and the pull callback
  for aes67_tx. tone -> the core's PTP-phased 1 kHz tone; off -> silence;
  hls/spotify -> ring with 1 s prefill (silence while buffering is not an
  underrun; running dry is, and prefills again). Status fields
  active_source, source_state, spotify_state, buffer_ms. source config
  applies live.
- New source.mode "tone" (validation, UI dropdown, doc) for commissioning.
- Temporary 440 Hz producer in hls mode (until the HLS player exists).
- Verified: tone 999.7 Hz -18 dBFS; off silent; hls 440.0 Hz with max
  sample step 60816 (ideal sine 60825, i.e. no discontinuities), buffer
  3983 ms, 0 underruns; spotify silent/not implemented.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-25 14:36:15 +10:00