- LICENSE (GPL-3.0) at the root; an MIT LICENSE in each components/aes67_*
and in web/, so they travel with the code when reused.
- THIRD_PARTY.md: third-party code and licences, and the known conflict of
the Espressif binary audio libraries with GPL-3.0 (firmware contains cspot).
- CLAUDE.md: rule to keep GPL code out of the core; phase 2 item to replace
the Espressif binaries (opencore-aacdec, Speex resampler).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- aes67_syslog: esp_log_set_vprintf hook chained to the UART; formats
into a static buffer under a zero-timeout mutex (drop and count when
busy), strips ANSI codes, parses level/tag, filters by log.level and
queues (48 messages, non-blocking). Low-priority sender task: RFC 5424
(<PRI>1 - HOST APP - - - MSG, no timestamp yet) or RFC 3164
(<PRI>HOST TAG: MSG), PRI = facility*8 + severity; log.host as IP or
resolved name; config applies live. Messages wait in the queue until
the interface has an IP. POST /api/log/test sends an info message
regardless of the level filter.
- Initialised first in app_main so boot messages are captured; the UDP
socket is created only once the interface is up (creating it before
esp_netif_init crashed at boot and the bootloader rolled back).
- Verified with a UDP listener: 5424 and 3164 formats, PRI 134/132,
boot messages delivered after the IP came up, shutdown messages sent
before reboot, level filter, test message, host by DNS name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- aes67_web/cfg.c: cfg_register(group, defaults, validate, apply),
cfg_override_defaults() for project defaults, cfg_get(). Stored values
are loaded on register and merged over defaults (known keys, matching
types). NVS keeps only keys that differ from defaults, one JSON string
per group, so new firmware defaults still reach untouched settings.
- POST /api/config: type check against defaults, per-group validation,
nothing stored unless every group passes; 400 "group.key: reason".
Unknown keys/groups are ignored. Returns the new config.
- Core groups registered by their components with the UI's ranges:
ptp (aes67_ptp), aes67 (aes67_tx, incl. multicast range and mono_sum
=> 1 channel), net/inet (aes67_net), log (aes67_syslog).
- Project: PROJECT.def overrides (hostname p4-aes67, name P4 AES67) and
the "source" group in main/project_cfg.c.
- Config is stored only; nothing is applied live yet.
- Verified on board: defaults, valid save, 8 rejected values (nothing
stored), persistence across reboot, restore to defaults.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Board checked with esptool: ESP32-P4 rev v1.3 (engineering silicon),
32 MB GigaDevice flash. Rev <3 support and 32 MB set in sdkconfig.defaults.
- OTA partition layout: nvs, otadata, phy_init, ota_0/ota_1 (6 MB each,
below 16 MB), coredump; no factory app. Partition table at 0x10000 so
the bootloader can grow.
- App rollback enabled in the bootloader from the start.
- PROJECT_VER from git describe --tags --always --dirty.
- Empty stubs for the nine aes67_* core components; main logs version
and chip revision.
- Built with ESP-IDF v5.5.5; not yet flashed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bsncubed