3 Commits

Author SHA1 Message Date
bsncubed 41103e3b5e Licences: MIT for the AES67 core and web page, GPL-3.0 for the rest
- LICENSE (GPL-3.0) at the root; an MIT LICENSE in each components/aes67_*
  and in web/, so they travel with the code when reused.
- THIRD_PARTY.md: third-party code and licences, and the known conflict of
  the Espressif binary audio libraries with GPL-3.0 (firmware contains cspot).
- CLAUDE.md: rule to keep GPL code out of the core; phase 2 item to replace
  the Espressif binaries (opencore-aacdec, Speex resampler).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-27 08:37:38 +10:00
bsncubed 69b4e18118 Step 1: Ethernet up (IP101/RMII), DHCP, link and IP logged
- aes67_board: Waveshare ESP32-P4-ETH pin profile and EMAC + IP101 driver
  install (PHY addr 1, reset GPIO51, ref clock in on GPIO50).
- aes67_net: Ethernet netif with DHCP client; logs link up/down (speed,
  duplex, MAC) and the DHCP lease.
- Verified on board: 100 Mbps full duplex, DHCP lease in ~8 s, ping
  0% loss, ~0.2 ms RTT.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 22:52:08 +10:00
bsncubed bbfd3506bf Step 0: IDF project skeleton for esp32p4 with core component stubs
- Board checked with esptool: ESP32-P4 rev v1.3 (engineering silicon),
  32 MB GigaDevice flash. Rev <3 support and 32 MB set in sdkconfig.defaults.
- OTA partition layout: nvs, otadata, phy_init, ota_0/ota_1 (6 MB each,
  below 16 MB), coredump; no factory app. Partition table at 0x10000 so
  the bootloader can grow.
- App rollback enabled in the bootloader from the start.
- PROJECT_VER from git describe --tags --always --dirty.
- Empty stubs for the nine aes67_* core components; main logs version
  and chip revision.
- Built with ESP-IDF v5.5.5; not yet flashed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-24 22:47:21 +10:00