bsncubed/aes67-ESP32-P4
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Network: status reports mask/gw/dns; UI shows the DHCP lease in the static fields

Browse Source 
With DHCP on, the greyed-out IP/netmask/gateway/DNS fields show the
addresses in use. Unticking DHCP keeps them as the starting point for a
static setup. (Static addressing itself is not applied yet.)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
Ben Nicholson
2026-09-25 23:42:35 +10:00
parent 122e46e862
commit c4468c4af0
3 changed files with 24 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/aes67-core-base.md
+2 -1
View File
@@ -26,12 +26,13 @@ Reference devices for UI and defaults: Riedel Bolero (PTP status), Riedel Direct
## Core API
- GET/POST /api/config (full JSON; POST validates, stores to NVS, applies live where possible, returns 4xx with message on bad values)
- Write-only keys (`cfg_mark_secret`, e.g. passwords/client secrets): GET returns "" for them; a POST with "" keeps the stored value, null clears it. Stored in NVS in plain text (NVS encryption is not enabled).
- GET /api/status -> {model?, fw?, power?, ip, aes67_ip, inet_ip, inet_vlan, mac, link, tx_packets, underruns, uptime_s, heap_free, psram_free, temps:[…], ptp:{…}, …project fields}
- GET /api/status -> {model?, fw?, power?, ip, aes67_ip, mask, gw, dns, inet_ip, inet_vlan, mac, link, tx_packets, underruns, uptime_s, heap_free, psram_free, temps:[…], ptp:{…}, …project fields}
- model, fw, power are optional; rows only appear when present (power e.g. "PoE" / "USB" if the board can detect it).
- GET /stream.sdp, POST /api/reboot, POST /api/log/test
- Firmware: GET /api/ota, POST /api/ota, POST /api/ota/confirm, POST /api/ota/rollback (see Firmware update)
## Temperatures
- `status.ip/mask/gw/dns` = the addresses in use (from DHCP or static; "" when none). With DHCP on, the UI shows them in the greyed-out static fields; unticking DHCP keeps them there as the starting point for a static setup.
- `status.temps` = array of {name, c, min_c, max_c, warn_c}; min/max since boot, warn_c optional. Any number of sensors; the UI renders one row per sensor and marks HIGH (red) at or above warn_c.
- ESP32-P4: on-die sensor via the `temperature_sensor` driver (driver/temperature_sensor.h). Pick the measurement range to suit (e.g. -10..80 °C), sample every ~2 s in the health task, and report it as "SoC". It measures the die, not ambient: expect it to read well above room temperature.
- Implemented with range 20..100 °C (±2 °C; the warning level must lie inside the range), warn_c 85 °C. On the test board the die reads ~27 °C at idle in a cool room.