From 49d66ff17f7777370f7bcaeda9032fb3c3c20062 Mon Sep 17 00:00:00 2001 From: Ben Nicholson Date: Fri, 2 Oct 2026 18:52:15 +1000 Subject: [PATCH] CLAUDE.md: step 4 verified on the Riedel, step 8 closed (mute check dropped) Co-Authored-By: Claude Opus 5.5 --- CLAUDE.md | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/CLAUDE.md b/CLAUDE.md index c98ba01..bd7b74d 100644 --- a/CLAUDE.md +++ b/CLAUDE.md @@ -51,8 +51,7 @@ Repo: https://gitea.apointless.space/bsncubed/aes67-ESP32-P4 - [x] 2a. Finding the device: mDNS (hostname.local + _http._tcp), then LLDP (switch shows name + IP). - [x] 2b. Firmware update: /api/ota upload + rollback self-test. Test: update to a new build, then deliberately flash a build that fails its self-test and confirm it rolls back. After this, flash over the network; keep USB for recovery. - [x] 3. PTP TimeReceiver: lock to an existing GM (Riedel), fill `status.ptp`. Confirm EMAC hardware timestamps work. First check whether the installed ESP-IDF has a PTP example/component for the P4 before writing one. -- [ ] 4. AES67 TX with a 1 kHz test tone, PTP-paced; /stream.sdp. Verify: import SDP on a Riedel Artist 4-wire AES67 port, and check packets/timestamps in Wireshark. - Done and checked with a receiver script (all ptimes, L16/L24, tone phase-locked to PTP); still open: the Riedel import and a Wireshark capture. +- [x] 4. AES67 TX with a 1 kHz test tone, PTP-paced; /stream.sdp. Verified with a receiver script (all ptimes, L16/L24, tone phase-locked to PTP) and on a Riedel Artist 4-wire AES67 port. - [x] 5. SAP discovery, then syslog, then health/temperatures (one at a time). VLAN split moved to phase 2. - [x] 6. PTP TimeTransmitter: BMCA roles (slave/auto; the separate "master" role was dropped later, auto with a low priority1 does the same), hybrid mode. - [ ] 7. Sources: HLS player, then cspot (Spotify Connect), then failover + /api/player. @@ -67,13 +66,12 @@ Repo: https://gitea.apointless.space/bsncubed/aes67-ESP32-P4 - First connects sometimes fail ("Can't connect to spotify servers"), a retry works. - Internal heap drops from ~365 KB to ~231 KB with a session; check what can move to PSRAM. - Track display in the app can switch ~3-5 s early. - - Mute at 0 % volume not yet confirmed. - Consider offering the delayed-Pong fix upstream (philippe44/cspot). - An old, long-idle session can get out of sync with the app: it sends empty Load frames ("No tracks in frame") instead of Pause/Play, so controls do nothing. Quitting and reopening Spotify on the Mac fixes it. - [x] failover (auto mode): no session or (with `failover_on_pause`) paused for `failover_delay_s` -> HLS; Spotify playing -> Spotify within ~1 s; 30 ms fades; HLS suspended while Spotify plays; cspot is held back (not drained) while it isn't Spotify's turn, so it resumes where it paused. Verified: no session -> HLS, play -> Spotify, pause stays (on_pause off), pause -> HLS after 5 s (on_pause on), play -> Spotify at the paused position. - Open: `aes67_tx resync` (TX 20-27 ms late) ~11 s after each switch to Spotify (seen 3 times); clicks at switches not yet checked in a recording; HLS start sometimes hits CDN read timeouts. - [x] /api/player: GET, transport, seek, volume (the app follows), source override and url (runtime, not saved); web UI progress bar. -- [ ] 8. Mono sum, gain, polish. +- [x] 8. Mono sum, gain, polish. - [x] Mono sum: stereo source mapped to a 1-channel stream in the core ((L+R)/2, 64 bit). Checked: 156 B packets, SDP L24/48000/1. - [x] Gain: source.gain_db as a trim on top of the volume, saturating. Checked: -12 dB = -12 dB peak, +12 dB clips at 0 dBFS. - [x] Pink noise source (-18 dBFS RMS, octaves flat within 0.4 dB 63 Hz-4 kHz). @@ -81,7 +79,6 @@ Repo: https://gitea.apointless.space/bsncubed/aes67-ESP32-P4 - [x] Network: status mask/gw/dns, UI shows the lease; static IP (reboot on change, validation). - [x] Web UI: sticky save bar, dark default + light toggle, progress bar, PTP panel (2 min average offset, details), uptime d/h/m/s, VLAN option hidden, no hw_ts / preferred-TimeTransmitter options. - [x] Versioning `-`; tools/flash_board.py (tested on this board); docs/user-guide.md. - - [ ] Mute at 0 % volume: confirm on the board. ## Phase 2 (parked) - [ ] Replace the Espressif binary audio libraries (GPL-3 conflict, see THIRD_PARTY.md): AAC via opencore-aacdec (Apache-2.0, in bell/external), 44.1 -> 48 kHz via the Speex resampler (BSD). Do together with / right before the clock-drift correction (Speex can steer the ratio).