#!/usr/bin/python3
import os
os.environ['RPI_LGPIO_REVISION'] = "800012"
import requests
import RPi.GPIO as GPIO # Import Raspberry Pi GPIO library

BenBusyRRCSdataRising = '''<?xml version="1.0"?>
<methodCall>
  <methodName>PressKeyEx</methodName>
  <params>
    <param><value><string>C0000000001</string></value></param>
    <param><value><i4>64</i4></value></param>
    <param><value><i4>46</i4></value></param>
    <param><value><boolean>0</boolean></value></param>
    <param><value><int>2</int></value></param>
    <param><value><int>0</int></value></param>
    <param><value><int>1</int></value></param>
    <param><value><boolean>1</boolean></value></param>   <!-- IsVirtKey -->
    <param><value><boolean>1</boolean></value></param> <!-- Press/Release -->
    <param><value><int>1</int></value></param>
  </params>
</methodCall>
'''

BenBusyRRCSdataFalling = '''<?xml version="1.0"?>
<methodCall>
  <methodName>PressKeyEx</methodName>
  <params>
    <param><value><string>C0000000002</string></value></param>
    <param><value><i4>64</i4></value></param>
    <param><value><i4>46</i4></value></param>
    <param><value><boolean>0</boolean></value></param>
    <param><value><int>2</int></value></param>
    <param><value><int>0</int></value></param>
    <param><value><int>1</int></value></param>
    <param><value><boolean>1</boolean></value></param>   <!-- IsVirtKey -->
    <param><value><boolean>0</boolean></value></param> <!-- Press/Release -->
    <param><value><int>1</int></value></param>
  </params>
</methodCall>
'''

def button_callbackRising(channel):
    print("Button was pushed!")
    r = requests.post('http://10.75.120.229:8193', headers = {'content-type': 'text/xml'}, data = BenBusyRRCSdataRising)
    print (r.text)

def button_callbackFalling(channel):
    print("Button was Released!")
    r = requests.post('http://10.75.120.229:8193', headers = {'content-type': 'text/xml'}, data = BenBusyRRCSdataFalling)
    print (r.text)

GPIO.setwarnings(False) # Ignore warning for now
GPIO.setmode(GPIO.BOARD) # Use physical pin numbering
GPIO.setup(12, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # Set pin 10 to be an input pin and set initial value to be pulle>

GPIO.add_event_detect(12,GPIO.RISING,callback=button_callbackRising) # Setup event on pin 10 rising edge

GPIO.add_event_detect(12,GPIO.FALLING,callback=button_callbackFalling)

message = input("Press enter to quit\n\n") # Run until someone presses enter

GPIO.cleanup() # Clean up