Upload files to "/"

ras_pi_RRCS_BusyLight.py

@@ -0,0 +1,63 @@
+#!/usr/bin/python3
+import os
+os.environ['RPI_LGPIO_REVISION'] = "800012"
+import requests
+import RPi.GPIO as GPIO # Import Raspberry Pi GPIO library
+
+BenBusyRRCSdataRising = '''<?xml version="1.0"?>
+<methodCall>
+  <methodName>PressKeyEx</methodName>
+  <params>
+    <param><value><string>C0000000001</string></value></param>
+    <param><value><i4>64</i4></value></param>
+    <param><value><i4>46</i4></value></param>
+    <param><value><boolean>0</boolean></value></param>
+    <param><value><int>2</int></value></param>
+    <param><value><int>0</int></value></param>
+    <param><value><int>1</int></value></param>
+    <param><value><boolean>1</boolean></value></param>   <!-- IsVirtKey -->
+    <param><value><boolean>1</boolean></value></param> <!-- Press/Release -->
+    <param><value><int>1</int></value></param>
+  </params>
+</methodCall>
+'''
+
+BenBusyRRCSdataFalling = '''<?xml version="1.0"?>
+<methodCall>
+  <methodName>PressKeyEx</methodName>
+  <params>
+    <param><value><string>C0000000002</string></value></param>
+    <param><value><i4>64</i4></value></param>
+    <param><value><i4>46</i4></value></param>
+    <param><value><boolean>0</boolean></value></param>
+    <param><value><int>2</int></value></param>
+    <param><value><int>0</int></value></param>
+    <param><value><int>1</int></value></param>
+    <param><value><boolean>1</boolean></value></param>   <!-- IsVirtKey -->
+    <param><value><boolean>0</boolean></value></param> <!-- Press/Release -->
+    <param><value><int>1</int></value></param>
+  </params>
+</methodCall>
+'''
+
+def button_callbackRising(channel):
+    print("Button was pushed!")
+    r = requests.post('http://10.75.120.229:8193', headers = {'content-type': 'text/xml'}, data = BenBusyRRCSdataRising)
+    print (r.text)
+
+def button_callbackFalling(channel):
+    print("Button was Released!")
+    r = requests.post('http://10.75.120.229:8193', headers = {'content-type': 'text/xml'}, data = BenBusyRRCSdataFalling)
+    print (r.text)
+
+GPIO.setwarnings(False) # Ignore warning for now
+GPIO.setmode(GPIO.BOARD) # Use physical pin numbering
+GPIO.setup(12, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # Set pin 10 to be an input pin and set initial value to be pulle>
+
+GPIO.add_event_detect(12,GPIO.RISING,callback=button_callbackRising) # Setup event on pin 10 rising edge
+
+GPIO.add_event_detect(12,GPIO.FALLING,callback=button_callbackFalling)
+
+message = input("Press enter to quit\n\n") # Run until someone presses enter
+
+GPIO.cleanup() # Clean up